From: Fabio Estevam fabio.estevam@freescale.com
HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as per FSL bootlets code.
mx23 Reference Manual mark HW_DRAM_CTL27 and HW_DRAM_CTL28 as "reserved".
HW_DRAM_CTL8 is setup as the last element.
So skip the initialization of these DRAM_CTL registers.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- Changes since v2: - None Changes since v1: - To avoid polluting the mx28 case, separate the function definition in mx23 and for mx28.
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index df25535..bf58058 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -110,6 +110,7 @@ __weak void mxs_adjust_memory_params(uint32_t *dram_vals) { }
+#ifdef CONFIG_MX28 static void initialize_dram_values(void) { int i; @@ -118,15 +119,26 @@ static void initialize_dram_values(void)
for (i = 0; i < ARRAY_SIZE(dram_vals); i++) writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); +} +#else +static void initialize_dram_values(void) +{ + int i; + + mxs_adjust_memory_params(dram_vals); + + for (i = 0; i < ARRAY_SIZE(dram_vals); i++) { + if (!(i == 8 || i == 27 || i == 28 || i == 35)) + writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); + }
-#ifdef CONFIG_MX23 /* * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last * element to be set */ writel((1 << 24), MXS_DRAM_BASE + (4 * 8)); -#endif } +#endif
static void mxs_mem_init_clock(void) {