From: Fabio Estevam fabio.estevam@nxp.com
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper.
Reported-by: Stefano Babic sbabic@denx.de Signed-off-by: Fabio Estevam fabio.estevam@nxp.com --- board/toradex/colibri_imx6/colibri_imx6.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index 756e3f3..a2a4214 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -630,9 +630,6 @@ int board_early_init_f(void) ARRAY_SIZE(pwr_intb_pads)); setup_iomux_uart();
-#if defined(CONFIG_VIDEO_IPUV3) - setup_display(); -#endif return 0; }
@@ -653,6 +650,10 @@ int board_init(void) setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc);
+#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif + #ifdef CONFIG_TDX_CMD_IMX_MFGR (void) pmic_init(); #endif