From: Konstantin Porotchkin kostap@marvell.com
This patch set adds support for Marvell ESPRESSOBin community board. The Marvell ESPRESSOBin is a tiny board made by Globalscale and available on KickStarter site. It has (current board version 3.1.1): - Dual core Cortex-A53 @1.2GHz CPU (Marvell Armada-3720) - 512MB/1GB/2GB DDR3 RAM (depends on selected configuration) - Mini-PCIe 2.0 slot - Single SATA-3 port with Molex SATA power connector - USB 2.0 port - USB 3.0 port - Gigabit Ethernet switch with 3 ports - Micro-SD socket - Two 46-pin GPIO connectors. - SPI boot flash - Boot source selection jumpers (SPI/SATA/UART/Auto) - Micro JTAG connector (10 pin) - Micro USB serial port
Konstantin Porotchkin (10): arm64: a37xx: Enable Marvell ETH PHY support arm64: a37xx: Enable bubt command support on A3720-DB arm64: a37xx: dts: Add pin control nodes to DT arm64: a37xx: Handle pin controls in early board init mvebu: neta: Add support for board init function mvebu: neta: a37xx: Add fixed link support to neta driver mvebu: a37xx: Add init for ESPRESSBin Topaz switch arm64: dts: Add device tree for ESPRESSOBin board arm64: mvebu: Add default config for ESPRESSOBin board arm64: a3720: Disable DB configurations on ESPRESSOBin board
arch/arm/dts/Makefile | 1 + arch/arm/dts/armada-3720-espressobin.dts | 135 ++++++++++++++++++++++++++++ arch/arm/dts/armada-37xx.dtsi | 14 +++ board/Marvell/mvebu_db-88f3720/board.c | 83 ++++++++++++++++- configs/mvebu_db-88f3720_defconfig | 3 + configs/mvebu_espressobin-88f3720_defconfig | 67 ++++++++++++++ drivers/net/mvneta.c | 125 ++++++++++++++++++++------ include/configs/mvebu_db-88f3720.h | 1 + 8 files changed, 400 insertions(+), 29 deletions(-) create mode 100644 arch/arm/dts/armada-3720-espressobin.dts create mode 100644 configs/mvebu_espressobin-88f3720_defconfig