This converts the following to Kconfig: CONFIG_ATMEL_LCD CONFIG_ATMEL_LCD_BGR555 CONFIG_ATMEL_LCD_RGB565 CONFIG_GURNARD_SPLASH
Signed-off-by: Tom Rini trini@konsulko.com --- README | 4 ---- board/bluewater/gurnard/Kconfig | 3 +++ configs/at91sam9261ek_dataflash_cs0_defconfig | 1 + configs/at91sam9261ek_dataflash_cs3_defconfig | 1 + configs/at91sam9261ek_nandflash_defconfig | 1 + configs/at91sam9263ek_dataflash_cs0_defconfig | 1 + configs/at91sam9263ek_dataflash_defconfig | 1 + configs/at91sam9263ek_nandflash_defconfig | 1 + configs/at91sam9263ek_norflash_boot_defconfig | 1 + configs/at91sam9263ek_norflash_defconfig | 1 + configs/gurnard_defconfig | 2 ++ configs/pm9261_defconfig | 2 ++ configs/pm9263_defconfig | 2 ++ drivers/video/Kconfig | 9 +++++++++ include/configs/at91sam9261ek.h | 4 ---- include/configs/at91sam9263ek.h | 2 -- include/configs/at91sam9m10g45ek.h | 2 -- include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9rlek.h | 2 -- include/configs/pm9261.h | 2 -- include/configs/pm9263.h | 2 -- include/configs/snapper9g45.h | 4 ---- 22 files changed, 26 insertions(+), 23 deletions(-)
diff --git a/README b/README index 0072e03b6313..805c8f0d0487 100644 --- a/README +++ b/README @@ -994,10 +994,6 @@ The following options need to be configured: display); also select one of the supported displays by defining one of these:
- CONFIG_ATMEL_LCD: - - HITACHI TX09D70VM1CCA, 3.5", 240x320. - CONFIG_NEC_NL6448AC33:
NEC NL6448AC33-18. Active, color, single scan. diff --git a/board/bluewater/gurnard/Kconfig b/board/bluewater/gurnard/Kconfig index e2cd9f00df8e..41ecbf7e22f5 100644 --- a/board/bluewater/gurnard/Kconfig +++ b/board/bluewater/gurnard/Kconfig @@ -1,5 +1,8 @@ if TARGET_GURNARD
+config GURNARD_SPLASH + def_bool y + config SYS_BOARD default "gurnard"
diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig index 3b30a024294a..5788b9d935f9 100644 --- a/configs/at91sam9261ek_dataflash_cs0_defconfig +++ b/configs/at91sam9261ek_dataflash_cs0_defconfig @@ -64,3 +64,4 @@ CONFIG_DM_SPI=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y +CONFIG_ATMEL_LCD_BGR555=y diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig index 776130ed6174..69d7931763f0 100644 --- a/configs/at91sam9261ek_dataflash_cs3_defconfig +++ b/configs/at91sam9261ek_dataflash_cs3_defconfig @@ -64,3 +64,4 @@ CONFIG_DM_SPI=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y +CONFIG_ATMEL_LCD_BGR555=y diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig index b80d5a6a5f66..32945796300a 100644 --- a/configs/at91sam9261ek_nandflash_defconfig +++ b/configs/at91sam9261ek_nandflash_defconfig @@ -62,3 +62,4 @@ CONFIG_DM_SPI=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y +CONFIG_ATMEL_LCD_BGR555=y diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig index 9de5028afa87..090ee4059835 100644 --- a/configs/at91sam9263ek_dataflash_cs0_defconfig +++ b/configs/at91sam9263ek_dataflash_cs0_defconfig @@ -68,3 +68,4 @@ CONFIG_DM_SPI=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y +CONFIG_ATMEL_LCD_BGR555=y diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig index 9de5028afa87..090ee4059835 100644 --- a/configs/at91sam9263ek_dataflash_defconfig +++ b/configs/at91sam9263ek_dataflash_defconfig @@ -68,3 +68,4 @@ CONFIG_DM_SPI=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y +CONFIG_ATMEL_LCD_BGR555=y diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig index ed12a9954fd0..82d6ecdbc505 100644 --- a/configs/at91sam9263ek_nandflash_defconfig +++ b/configs/at91sam9263ek_nandflash_defconfig @@ -66,3 +66,4 @@ CONFIG_DM_SPI=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y +CONFIG_ATMEL_LCD_BGR555=y diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig index 34140444ca5e..0e96b3a9c13c 100644 --- a/configs/at91sam9263ek_norflash_boot_defconfig +++ b/configs/at91sam9263ek_norflash_boot_defconfig @@ -66,3 +66,4 @@ CONFIG_DM_SPI=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y +CONFIG_ATMEL_LCD_BGR555=y diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig index aab31afc52eb..20a105085cea 100644 --- a/configs/at91sam9263ek_norflash_defconfig +++ b/configs/at91sam9263ek_norflash_defconfig @@ -67,3 +67,4 @@ CONFIG_DM_SPI=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y +CONFIG_ATMEL_LCD_BGR555=y diff --git a/configs/gurnard_defconfig b/configs/gurnard_defconfig index fc6c2b96b7be..20be0e3c29d7 100644 --- a/configs/gurnard_defconfig +++ b/configs/gurnard_defconfig @@ -59,4 +59,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_DM_VIDEO=y # CONFIG_VIDEO_LOGO is not set # CONFIG_VIDEO_BPP32 is not set +CONFIG_ATMEL_LCD=y +CONFIG_LCD=y CONFIG_CMD_DHRYSTONE=y diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig index 7a640ff35ece..bda991795e24 100644 --- a/configs/pm9261_defconfig +++ b/configs/pm9261_defconfig @@ -60,5 +60,7 @@ CONFIG_DM_SPI=y CONFIG_USB=y CONFIG_DM_VIDEO=y # CONFIG_VIDEO_BPP32 is not set +CONFIG_ATMEL_LCD=y +CONFIG_ATMEL_LCD_BGR555=y CONFIG_LCD=y CONFIG_REGEX=y diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig index 3c5f0b73abf6..c9a8552266f8 100644 --- a/configs/pm9263_defconfig +++ b/configs/pm9263_defconfig @@ -64,5 +64,7 @@ CONFIG_DM_SPI=y CONFIG_USB=y CONFIG_DM_VIDEO=y # CONFIG_VIDEO_BPP32 is not set +CONFIG_ATMEL_LCD=y +CONFIG_ATMEL_LCD_BGR555=y CONFIG_LCD=y CONFIG_JFFS2_NAND=y diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 646fec70262c..82d4569eab77 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -421,6 +421,15 @@ config VIDEO_LCD_ANX9804 from a parallel LCD interface and translate it on the fy into a DP interface for driving eDP TFT displays. It uses I2C for configuration.
+config ATMEL_LCD + bool "Atmel LCD panel support" + depends on LCD && ARCH_AT91 + +config ATMEL_LCD_BGR555 + bool "Display in BGR555 mode" + help + Use the BGR555 output mode. Otherwise RGB565 is used. + config VIDEO_LCD_ORISETECH_OTM8009A bool "OTM8009A DSI LCD panel support" depends on DM_VIDEO diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 0b6706b95d94..dcad025541f1 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -26,10 +26,6 @@ #undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO #define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_LCD -#ifdef CONFIG_AT91SAM9261EK -#define CONFIG_ATMEL_LCD_BGR555 -#endif
/* SDRAM */ #define CONFIG_SYS_SDRAM_BASE 0x20000000 diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index c48810d81252..38ca1f80237f 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -37,8 +37,6 @@ #undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO 1 #define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1
/* SDRAM */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 7e8e35b7aa6c..ffa090ac1236 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -22,8 +22,6 @@ #undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO #define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_LCD -#define CONFIG_ATMEL_LCD_RGB565
/* SDRAM */ #define CONFIG_SYS_SDRAM_BASE 0x70000000 diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 1771defa164d..f02239c25052 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -21,7 +21,6 @@ #define CONFIG_LCD_LOGO #define CONFIG_LCD_INFO #define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_LCD_RGB565
#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 89cfcbd9517f..369b981e3eec 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -26,8 +26,6 @@ #undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO 1 #define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_RGB565 1 /* Let board_init_f handle the framebuffer allocation */ #undef CONFIG_FB_ADDR
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 3960a5cf96a4..fb801b3d241d 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -134,8 +134,6 @@ #undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO 1 #define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1
/* SDRAM */ #define PHYS_SDRAM 0x20000000 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 8ee8bbb21921..52cc0886a65a 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -145,8 +145,6 @@ #undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO 1 #define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1
#define CONFIG_LCD_IN_PSRAM 1
diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index 9e78fd219ccd..0e3567f535b4 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -38,10 +38,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
-/* LCD */ -#define CONFIG_ATMEL_LCD -#define CONFIG_GURNARD_SPLASH - /* UARTs/Serial console */
/* Boot options */