On Wednesday, February 25, 2015 at 05:51:38 AM, Ramneek Mehresh wrote:
Hi Marek,
Thanks for the reply.
Yes, we are seeing USB 3.0 pen drives from different vendors taking different times to give connect-change on latest u-boot. Out of all, HP pen drive is taking most of the time.
Is this even a bug ? Are you capable of debugging this ? Maybe it's just a crappy drive .
Would it be possible for you to send the list of devices that you normally test? We just want to cross-verify if any of the same device tested on out platform is not giving any issue.
I don't think there's any point in my enumerating random flashes I have here. Instead, please report possible misbehavior in case you stumble upon one. At best, with a patch attached even.
And please do not top-post .
Thanks and Regards, Ramneek
-----Original Message----- From: Marek Vasut [mailto:marex@denx.de] Sent: Tuesday, February 24, 2015 11:09 PM To: Mehresh Ramneek-B31383 Cc: u-boot@lists.denx.de Subject: Re: Regarding USB device testing in U-boot release
On Tuesday, February 24, 2015 at 06:59:40 AM, Ramneek Mehresh wrote:
Hi Marex,
Hi,
please keep the list on CC (fixed).
Could you please confirm if some USB devices are tested before each U-boot release by Denx? If yes, then I would request you to please share the list of these devices?
I do my testing with a couple of USB 2.0/USB 3.0 sticks on Altera SoCFPGA Cyclone V and newly also Arria V. I also do some testing on iMX28, 53 and 6 platforms from Freescale. The rest of the testing is up to the community. In my experience, in case there's a regression in the USB stack, someone starts complaining about it sooner rather than later.
Do you have any particular device which is broken ?
Best regards, Marek Vasut
Best regards, Marek Vasut