Add driver for Motorcomm YT8521S Gigabit ethernet phy.
Signed-off-by: Frank Sae Frank.Sae@motor-comm.com --- drivers/net/phy/motorcomm.c | 90 ++++++++++++++++++++++++++++++++++++- 1 file changed, 89 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index a1d5eac7bf..40fde86c45 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Motorcomm YT8511/YT8531/YT8531S/YT8821 PHY driver. + * Motorcomm YT8511/YT8531/YT8531S/YT8821/YT8521S PHY driver. * * Copyright (C) 2024 Motorcomm Electronic Technology Co., Ltd. */ @@ -14,6 +14,7 @@ #define PHY_ID_YT8531 0x4f51e91b #define PHY_ID_YT8821 0x4f51ea19 #define PHY_ID_YT8531S 0x4f51e91a +#define PHY_ID_YT8521S 0x0000011a #define PHY_ID_MASK GENMASK(31, 0)
/* Extended Register's Address Offset Register */ @@ -34,6 +35,17 @@ #define YTPHY_DTS_OUTPUT_CLK_25M 25000000 #define YTPHY_DTS_OUTPUT_CLK_125M 125000000
+#define YT8521S_SCR_SYNCE_ENABLE BIT(5) +/* 1b0 output 25m clock *default* + * 1b1 output 125m clock + */ +#define YT8521S_SCR_CLK_FRE_SEL_125M BIT(3) +#define YT8521S_SCR_CLK_SRC_MASK GENMASK(2, 1) +#define YT8521S_SCR_CLK_SRC_PLL_125M 0 +#define YT8521S_SCR_CLK_SRC_UTP_RX 1 +#define YT8521S_SCR_CLK_SRC_SDS_RX 2 +#define YT8521S_SCR_CLK_SRC_REF_25M 3 + #define YT8511_EXT_CLK_GATE 0x0c #define YT8511_EXT_DELAY_DRIVE 0x0d #define YT8511_EXT_SLEEP_CTRL 0x27 @@ -1115,6 +1127,71 @@ static int yt8821_startup(struct phy_device *phydev) return 0; }
+static int yt8521s_config(struct phy_device *phydev) +{ + struct ytphy_plat_priv *priv = phydev->priv; + u16 mask, val; + int ret; + + ret = genphy_config_aneg(phydev); + if (ret < 0) + return ret; + + ytphy_dt_parse(phydev); + switch (priv->clk_out_frequency) { + case YTPHY_DTS_OUTPUT_CLK_DIS: + mask = YT8521S_SCR_SYNCE_ENABLE; + val = 0; + break; + case YTPHY_DTS_OUTPUT_CLK_25M: + mask = YT8521S_SCR_SYNCE_ENABLE | YT8521S_SCR_CLK_SRC_MASK | + YT8521S_SCR_CLK_FRE_SEL_125M; + val = YT8521S_SCR_SYNCE_ENABLE | + FIELD_PREP(YT8521S_SCR_CLK_SRC_MASK, + YT8521S_SCR_CLK_SRC_REF_25M); + break; + case YTPHY_DTS_OUTPUT_CLK_125M: + mask = YT8521S_SCR_SYNCE_ENABLE | YT8521S_SCR_CLK_SRC_MASK | + YT8521S_SCR_CLK_FRE_SEL_125M; + val = YT8521S_SCR_SYNCE_ENABLE | YT8521S_SCR_CLK_FRE_SEL_125M | + FIELD_PREP(YT8521S_SCR_CLK_SRC_MASK, + YT8521S_SCR_CLK_SRC_PLL_125M); + break; + default: + pr_warn("Freq err:%u\n", priv->clk_out_frequency); + return -EINVAL; + } + + ret = ytphy_modify_ext(phydev, YTPHY_SYNCE_CFG_REG, mask, + val); + if (ret < 0) + return ret; + + ret = ytphy_rgmii_clk_delay_config(phydev); + if (ret < 0) + return ret; + + if (priv->flag & AUTO_SLEEP_DISABLED) { + /* disable auto sleep */ + ret = ytphy_modify_ext(phydev, + YT8531_EXTREG_SLEEP_CONTROL1_REG, + YT8531_ESC1R_SLEEP_SW, 0); + if (ret < 0) + return ret; + } + + if (priv->flag & KEEP_PLL_ENABLED) { + /* enable RXC clock when no wire plug */ + ret = ytphy_modify_ext(phydev, + YT8531_CLOCK_GATING_REG, + YT8531_CGR_RX_CLK_EN, 0); + if (ret < 0) + return ret; + } + + return 0; +} + static int yt8531s_config(struct phy_device *phydev) { struct ytphy_plat_priv *priv = phydev->priv; @@ -1237,3 +1314,14 @@ U_BOOT_PHY_DRIVER(motorcomm8531S) = { .startup = &yt8531s_startup, .shutdown = &genphy_shutdown, }; + +U_BOOT_PHY_DRIVER(motorcomm8521S) = { + .name = "YT8521S Gigabit Ethernet Transceiver", + .uid = PHY_ID_YT8521S, + .mask = PHY_ID_MASK, + .features = PHY_GBIT_FEATURES, + .probe = &yt8531_probe, + .config = &yt8521s_config, + .startup = &yt8531s_startup, + .shutdown = &genphy_shutdown, +};