The phycore_rk3288 board has a SPL size problem, so remove phycore_init() function to stay within the limits.
Signed-off-by: Johan Jonker jbx6244@gmail.com --- arch/arm/mach-rockchip/rk3288/Kconfig | 1 - board/phytec/phycore_rk3288/phycore-rk3288.c | 46 -------------------- 2 files changed, 47 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig index e8c57843..1be2b585 100644 --- a/arch/arm/mach-rockchip/rk3288/Kconfig +++ b/arch/arm/mach-rockchip/rk3288/Kconfig @@ -89,7 +89,6 @@ config TARGET_MIQI_RK3288 config TARGET_PHYCORE_RK3288 bool "phyCORE-RK3288" select BOARD_LATE_INIT - select SPL_BOARD_INIT if SPL help Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination diff --git a/board/phytec/phycore_rk3288/phycore-rk3288.c b/board/phytec/phycore_rk3288/phycore-rk3288.c index 17b987f6..3f49f39e 100644 --- a/board/phytec/phycore_rk3288/phycore-rk3288.c +++ b/board/phytec/phycore_rk3288/phycore-rk3288.c @@ -19,8 +19,6 @@ #include <netdev.h> #include <linux/bitops.h> #include "som.h" -#include <power/regulator.h> -#include <power/rk8xx_pmic.h>
static int valid_rk3288_som(struct rk3288_som *som) { @@ -77,47 +75,3 @@ int rk3288_board_late_init(void)
return 0; } - -#ifdef CONFIG_SPL_BUILD -#if !defined(CONFIG_SPL_OF_PLATDATA) -static int phycore_init(void) -{ - struct udevice *pmic; - int ret; - - ret = uclass_first_device_err(UCLASS_PMIC, &pmic); - if (ret) - return ret; - -#if defined(CONFIG_SPL_POWER) - /* Increase USB input current to 2A */ - ret = rk818_spl_configure_usb_input_current(pmic, 2000); - if (ret) - return ret; - - /* Close charger when USB lower then 3.26V */ - ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000); - if (ret) - return ret; -#endif - - return 0; -} -#endif - -void spl_board_init(void) -{ -#if !defined(CONFIG_SPL_OF_PLATDATA) - int ret; - - if (of_machine_is_compatible("phytec,rk3288-phycore-som")) { - ret = phycore_init(); - if (ret) { - debug("Failed to set up phycore power settings: %d\n", - ret); - return; - } - } -#endif -} -#endif