From: Jeroen Hofstee jhofstee@victronenergy.com
Remove unnecessary brackets. Unwrap lines which are below 80 chars. Single line comment as single line (as the rest). Moved init values to the source code.
cc: s-paulraj@ti.com cc: khasim@ti.com Signed-off-by: Jeroen Hofstee jhofstee@victronenergy.com --- arch/arm/include/asm/arch-omap3/dss.h | 24 ++++-------------------- drivers/video/omap3_dss.c | 33 +++++++++++++-------------------- 2 files changed, 17 insertions(+), 40 deletions(-)
diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h index 101e8c8..a830c43 100644 --- a/arch/arm/include/asm/arch-omap3/dss.h +++ b/arch/arm/include/asm/arch-omap3/dss.h @@ -28,9 +28,7 @@ #ifndef DSS_H #define DSS_H
-/* - * DSS Base Registers - */ +/* DSS Base Registers */ #define OMAP3_DSS_BASE 0x48050000 #define OMAP3_DISPC_BASE 0x48050400 #define OMAP3_VENC_BASE 0x48050C00 @@ -163,26 +161,14 @@ struct venc_regs { #define GP_OUT0 (1 << 15) #define GP_OUT1 (1 << 16)
-#define DISPC_ENABLE (LCD_ENABLE | \ - DIG_ENABLE | \ - GO_LCD | \ - GO_DIG | \ - GP_OUT0| \ - GP_OUT1) - /* Configure VENC DSS Params */ #define VENC_CLK_ENABLE (1 << 3) #define DAC_DEMEN (1 << 4) #define DAC_POWERDN (1 << 5) #define VENC_OUT_SEL (1 << 6) #define DIG_LPP_SHIFT 16 -#define VENC_DSS_CONFIG (VENC_CLK_ENABLE | \ - DAC_DEMEN | \ - DAC_POWERDN | \ - VENC_OUT_SEL) -/* - * Panel Configuration - */ + +/* Panel Configuration */ struct panel_config { u32 timing_h; u32 timing_v; @@ -196,9 +182,7 @@ struct panel_config { void *frame_buffer; };
-/* - * Generic DSS Functions - */ +/* Generic DSS Functions */ void omap3_dss_venc_config(const struct venc_regs *venc_cfg, u32 height, u32 width); void omap3_dss_panel_config(const struct panel_config *panel_cfg); diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c index dfe61b3..6686718 100644 --- a/drivers/video/omap3_dss.c +++ b/drivers/video/omap3_dss.c @@ -30,9 +30,7 @@ #include <asm/arch/dss.h> #include <video_fb.h>
-/* - * Configure VENC for a given Mode (NTSC / PAL) - */ +/* Configure VENC for a given Mode (NTSC / PAL) */ void omap3_dss_venc_config(const struct venc_regs *venc_cfg, u32 height, u32 width) { @@ -65,10 +63,8 @@ void omap3_dss_venc_config(const struct venc_regs *venc_cfg, writel(venc_cfg->savid__eavid, &venc->savid__eavid); writel(venc_cfg->flen__fal, &venc->flen__fal); writel(venc_cfg->lal__phase_reset, &venc->lal__phase_reset); - writel(venc_cfg->hs_int_start_stop_x, - &venc->hs_int_start_stop_x); - writel(venc_cfg->hs_ext_start_stop_x, - &venc->hs_ext_start_stop_x); + writel(venc_cfg->hs_int_start_stop_x, &venc->hs_int_start_stop_x); + writel(venc_cfg->hs_ext_start_stop_x, &venc->hs_ext_start_stop_x); writel(venc_cfg->vs_int_start_x, &venc->vs_int_start_x); writel(venc_cfg->vs_int_stop_x__vs_int_start_y, &venc->vs_int_stop_x__vs_int_start_y); @@ -94,15 +90,14 @@ void omap3_dss_venc_config(const struct venc_regs *venc_cfg, writel(venc_cfg->dac_b__dac_c, &venc->dac_b__dac_c);
/* Configure DSS for VENC Settings */ - writel(VENC_DSS_CONFIG, &dss->control); + writel(VENC_CLK_ENABLE | DAC_DEMEN | DAC_POWERDN | VENC_OUT_SEL, + &dss->control);
/* Configure height and width for Digital out */ - writel(((height << DIG_LPP_SHIFT) | width), &dispc->size_dig); + writel(height << DIG_LPP_SHIFT | width, &dispc->size_dig); }
-/* - * Configure Panel Specific Parameters - */ +/* Configure Panel Specific Parameters */ void omap3_dss_panel_config(const struct panel_config *panel_cfg) { struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE; @@ -117,9 +112,9 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg) writel(panel_cfg->pol_freq, &dispc->pol_freq); writel(panel_cfg->divisor, &dispc->divisor); writel(panel_cfg->lcd_size, &dispc->size_lcd); - writel((panel_cfg->load_mode << FRAME_MODE_SHIFT), &dispc->config); - writel(((panel_cfg->panel_type << TFTSTN_SHIFT) | - (panel_cfg->data_lines << DATALINES_SHIFT)), &dispc->control); + writel(panel_cfg->load_mode << FRAME_MODE_SHIFT, &dispc->config); + writel(panel_cfg->panel_type << TFTSTN_SHIFT | + panel_cfg->data_lines << DATALINES_SHIFT, &dispc->control); writel(panel_cfg->panel_color, &dispc->default_color0); writel((u32) panel_cfg->frame_buffer, &dispc->gfx_ba0);
@@ -133,16 +128,14 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg) writel(panel_cfg->lcd_size, &dispc->gfx_size); }
-/* - * Enable LCD and DIGITAL OUT in DSS - */ +/* Enable LCD and DIGITAL OUT in DSS */ void omap3_dss_enable(void) { struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE; - u32 l = 0; + u32 l;
l = readl(&dispc->control); - l |= DISPC_ENABLE; + l |= LCD_ENABLE | GO_LCD | DIG_ENABLE | GO_DIG | GP_OUT0 | GP_OUT1; writel(l, &dispc->control); }