5 Jun
2018
5 Jun
'18
11:25 a.m.
On 03.06.2018 06:21, Chris Packham wrote:
The SBx81LIFKW boards connect to the internal chassis management network via a Marvell 88e6097 L2 switch. The chassis connections are direct serdes on ports 8 and 9 with a RGMII interface on port 10 connected to the CPU MAC.
For debugging purposes ports 0 and 1 are also taken out to headers on the board. Because the debug interfaces are sometimes connected to with straight ribbon cables we need to run them at 10Mbps.
Signed-off-by: Chris Packham judge.packham@gmail.com
Applied to u-boot-marvell/master.
Thanks, Stefan