On Fri, 16 Feb 2024 at 02:22, Caleb Connolly caleb.connolly@linaro.org wrote:
Import the PM8998 and PMI8998 PMIC DTSI files from Linux as well as the common audio codec in preperation for replacing board DTS files
s/preperation/preparation/
with upstream.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Caleb Connolly caleb.connolly@linaro.org
arch/arm/dts/pm8998.dtsi | 130 +++++++++++++++++++++++++++++++++++++++ arch/arm/dts/pmi8998.dtsi | 98 +++++++++++++++++++++++++++++ arch/arm/dts/sdm845-wcd9340.dtsi | 86 ++++++++++++++++++++++++++ 3 files changed, 314 insertions(+)
Reviewed-by: Sumit Garg sumit.garg@linaro.org
-Sumit
diff --git a/arch/arm/dts/pm8998.dtsi b/arch/arm/dts/pm8998.dtsi new file mode 100644 index 000000000000..3f82715392c6 --- /dev/null +++ b/arch/arm/dts/pm8998.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */
+#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h>
+/ {
thermal-zones {pm8998-thermal {polling-delay-passive = <250>;polling-delay = <1000>;thermal-sensors = <&pm8998_temp>;trips {pm8998_alert0: pm8998-alert0 {temperature = <105000>;hysteresis = <2000>;type = "passive";};pm8998_crit: pm8998-crit {temperature = <125000>;hysteresis = <2000>;type = "critical";};};};};+};
+&spmi_bus {
pm8998_lsid0: pmic@0 {compatible = "qcom,pm8998", "qcom,spmi-pmic";reg = <0x0 SPMI_USID>;#address-cells = <1>;#size-cells = <0>;pm8998_pon: pon@800 {compatible = "qcom,pm8998-pon";reg = <0x800>;mode-bootloader = <0x2>;mode-recovery = <0x1>;pm8998_pwrkey: pwrkey {compatible = "qcom,pm8941-pwrkey";interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;debounce = <15625>;bias-pull-up;linux,code = <KEY_POWER>;};pm8998_resin: resin {compatible = "qcom,pm8941-resin";interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;debounce = <15625>;bias-pull-up;status = "disabled";};};pm8998_temp: temp-alarm@2400 {compatible = "qcom,spmi-temp-alarm";reg = <0x2400>;interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;io-channels = <&pm8998_adc ADC5_DIE_TEMP>;io-channel-names = "thermal";#thermal-sensor-cells = <0>;};pm8998_coincell: charger@2800 {compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";reg = <0x2800>;status = "disabled";};pm8998_adc: adc@3100 {compatible = "qcom,spmi-adc-rev2";reg = <0x3100>;interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;#address-cells = <1>;#size-cells = <0>;#io-channel-cells = <1>;channel@6 {reg = <ADC5_DIE_TEMP>;label = "die_temp";};};pm8998_adc_tm: adc-tm@3400 {compatible = "qcom,spmi-adc-tm-hc";reg = <0x3400>;interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;#thermal-sensor-cells = <1>;#address-cells = <1>;#size-cells = <0>;status = "disabled";};rtc@6000 {compatible = "qcom,pm8941-rtc";reg = <0x6000>, <0x6100>;reg-names = "rtc", "alarm";interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;};pm8998_gpios: gpio@c000 {compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";reg = <0xc000>;gpio-controller;gpio-ranges = <&pm8998_gpios 0 0 26>;#gpio-cells = <2>;interrupt-controller;#interrupt-cells = <2>;};};pm8998_lsid1: pmic@1 {compatible = "qcom,pm8998", "qcom,spmi-pmic";reg = <0x1 SPMI_USID>;#address-cells = <1>;#size-cells = <0>;};+}; diff --git a/arch/arm/dts/pmi8998.dtsi b/arch/arm/dts/pmi8998.dtsi new file mode 100644 index 000000000000..cd3f0790fd42 --- /dev/null +++ b/arch/arm/dts/pmi8998.dtsi @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h>
+&spmi_bus {
pmi8998_lsid0: pmic@2 {compatible = "qcom,pmi8998", "qcom,spmi-pmic";reg = <0x2 SPMI_USID>;#address-cells = <1>;#size-cells = <0>;pmi8998_charger: charger@1000 {compatible = "qcom,pmi8998-charger";reg = <0x1000>;interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,<0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,<0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,<0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;interrupt-names = "usb-plugin","bat-ov","wdog-bark","usbin-icl-change";io-channels = <&pmi8998_rradc 3>,<&pmi8998_rradc 4>;io-channel-names = "usbin_i", "usbin_v";status = "disabled";};pmi8998_gpios: gpio@c000 {compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";reg = <0xc000>;gpio-controller;gpio-ranges = <&pmi8998_gpios 0 0 14>;#gpio-cells = <2>;interrupt-controller;#interrupt-cells = <2>;};pmi8998_rradc: adc@4500 {compatible = "qcom,pmi8998-rradc";reg = <0x4500>;#io-channel-cells = <1>;};};pmi8998_lsid1: pmic@3 {compatible = "qcom,pmi8998", "qcom,spmi-pmic";reg = <0x3 SPMI_USID>;#address-cells = <1>;#size-cells = <0>;labibb {compatible = "qcom,pmi8998-lab-ibb";ibb: ibb {interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,<0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;interrupt-names = "sc-err", "ocp";};lab: lab {interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,<0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;interrupt-names = "sc-err", "ocp";};};pmi8998_lpg: pwm {compatible = "qcom,pmi8998-lpg";#address-cells = <1>;#size-cells = <0>;#pwm-cells = <2>;status = "disabled";};pmi8998_flash: led-controller@d300 {compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led";reg = <0xd300>;status = "disabled";};pmi8998_wled: leds@d800 {compatible = "qcom,pmi8998-wled";reg = <0xd800>, <0xd900>;interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,<0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;interrupt-names = "ovp", "short";label = "backlight";status = "disabled";};};+}; diff --git a/arch/arm/dts/sdm845-wcd9340.dtsi b/arch/arm/dts/sdm845-wcd9340.dtsi new file mode 100644 index 000000000000..c15d48860646 --- /dev/null +++ b/arch/arm/dts/sdm845-wcd9340.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- SDM845 SoC device tree source
- Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
+&slim {
status = "okay";slim@1 {reg = <1>;#address-cells = <2>;#size-cells = <0>;wcd9340_ifd: ifd@0,0 {compatible = "slim217,250";reg = <0 0>;};wcd9340: codec@1,0 {compatible = "slim217,250";reg = <1 0>;slim-ifc-dev = <&wcd9340_ifd>;#sound-dai-cells = <1>;interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;interrupt-controller;#interrupt-cells = <1>;clock-names = "extclk";clocks = <&rpmhcc RPMH_LN_BB_CLK2>;#clock-cells = <0>;clock-frequency = <9600000>;clock-output-names = "mclk";pinctrl-0 = <&wcd_intr_default>;pinctrl-names = "default";qcom,micbias1-microvolt = <1800000>;qcom,micbias2-microvolt = <1800000>;qcom,micbias3-microvolt = <1800000>;qcom,micbias4-microvolt = <1800000>;#address-cells = <1>;#size-cells = <1>;wcdgpio: gpio-controller@42 {compatible = "qcom,wcd9340-gpio";gpio-controller;#gpio-cells = <2>;reg = <0x42 0x2>;};swm: swm@c85 {compatible = "qcom,soundwire-v1.3.0";reg = <0xc85 0x40>;interrupts-extended = <&wcd9340 20>;qcom,dout-ports = <6>;qcom,din-ports = <2>;qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;#sound-dai-cells = <1>;clocks = <&wcd9340>;clock-names = "iface";#address-cells = <2>;#size-cells = <0>;};};};+};
+&tlmm {
wcd_intr_default: wcd-intr-default-state {pins = "gpio54";function = "gpio";bias-pull-down;drive-strength = <2>;};+};
-- 2.43.1