This new make target "u-boot-img-spl-at-end.bin" consists of the the real, full-blown U-Boot image and the U-Boot SPL binary directly attached to it. The full-blown U-Boot image has the mkimage header included, with its load-address and entry-point.
This will be used by the upcoming lwmon5 PPC440EPx derivate board port.
Signed-off-by: Stefan Roese sr@denx.de --- Makefile | 12 ++++++++++++ config.mk | 4 ++++ 2 files changed, 16 insertions(+)
diff --git a/Makefile b/Makefile index 3305e8c..42bd96a 100644 --- a/Makefile +++ b/Makefile @@ -548,6 +548,18 @@ endif $(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+# PPC4xx needs the SPL at the end of the image, since the reset vector +# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target +# and need to introduce a new build target with the full blown U-Boot +# at the start padded up to the start of the SPL image. And then concat +# the SPL image to the end. +$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img + tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \ + of=$(obj)u-boot-pad.img 2>/dev/null + dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \ + conv=notrunc 2>/dev/null + cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@ + ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \ diff --git a/config.mk b/config.mk index b7cd481..c73f510 100644 --- a/config.mk +++ b/config.mk @@ -217,6 +217,10 @@ ifneq ($(CONFIG_SPL_PAD_TO),) CPPFLAGS += -DCONFIG_SPL_PAD_TO=$(CONFIG_SPL_PAD_TO) endif
+ifneq ($(CONFIG_UBOOT_PAD_TO),) +CPPFLAGS += -DCONFIG_UBOOT_PAD_TO=$(CONFIG_UBOOT_PAD_TO) +endif + ifeq ($(CONFIG_SPL_BUILD),y) CPPFLAGS += -DCONFIG_SPL_BUILD endif