Hi,
This patch series using ZynqMP firmware driver to provide a interface to communicate with the PMU Firmware. As part of the series a mailbox driver is also implemented to handle communication through ipi interface.
There are two new wiring: 1. Reading PMUFW version via firmware driver - mailbox driver in case of SPL - SMC in case of full U-Boot 2. Using the same patch for loading PMUFW configuration object
The whole series is based on several patches I have sent already that's why I am providing a branch which also contains this series. https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze/tree/next
Thanks, Michal
Ibai Erkiaga (10): mailbox: check ops prior calling mailbox: allow subnode for mbox regs mailbox: zynqmp: ipi mailbox driver firmware: zynqmp: Add zynqmp-power support arm64: zynqmp: add firmware and mailbox node to DT firmware: zynqmp: get fw version with mailbox driver firmware: zynqmp: create firmware header arm64: zynqmp: use firmware driver to get version arm64: zynqmp: remove old fw version function arm64: zynqmp: probe firmware driver
Michal Simek (3): arm64: zynqmp: Cleanup PM SMC macro composition firmware: zynqmp: Separate function for sending message via mailbox arm64: zynqmp: Use mailbox driver for PMUFW config loading
MAINTAINERS | 2 + arch/arm/Kconfig | 3 + arch/arm/dts/zynqmp.dtsi | 44 +++++- arch/arm/mach-zynqmp/Makefile | 4 - arch/arm/mach-zynqmp/cpu.c | 24 +--- arch/arm/mach-zynqmp/include/mach/sys_proto.h | 24 +--- arch/arm/mach-zynqmp/pmu_ipc.c | 112 --------------- board/xilinx/zynqmp/cmds.c | 1 + board/xilinx/zynqmp/zynqmp.c | 19 +-- drivers/firmware/Kconfig | 2 + drivers/firmware/firmware-zynqmp.c | 131 +++++++++++++++++ drivers/fpga/zynqmppl.c | 5 +- drivers/mailbox/Kconfig | 6 + drivers/mailbox/Makefile | 1 + drivers/mailbox/mailbox-uclass.c | 19 ++- drivers/mailbox/zynqmp-ipi.c | 134 ++++++++++++++++++ include/zynqmp_firmware.h | 37 +++++ 17 files changed, 388 insertions(+), 180 deletions(-) delete mode 100644 arch/arm/mach-zynqmp/pmu_ipc.c create mode 100644 drivers/mailbox/zynqmp-ipi.c create mode 100644 include/zynqmp_firmware.h