Hi all, I am quite new to U-Boot,
'm trying to change u-boot 1.2.0 distribution for Freescale Argonavis evaluation board (mounting FSL 8641D) in order to obtain the following behaviour: - run u-boot on core1 instead f core0 ASAP. My "state-of-the art" is the following: in start.S (cold_boot) when running from core0 (startup core) I unlock core1 MPX bus, then I raise a hreset to core1 via PRR: at this point core0 has finished. Then, core1 starts and executes u-boot normally. Point is: u-boot is executed, got prompt, etc... but some of the peripherals does not work. For instance, I cannot receive or transmit ethernet frames through any of the 4 ports.
Any hint on how to proceed?
Another problem is obtaining an up-to-date source tree from a ftp site: I do not have access to cvs repositories from my intranet due to my ISA server, but current 1.2.0 officially downloadable from DENX ftp site seems to miss all the 8641D-specific changes I've seen browsing the u-boot-users mailing list. Is there ftp access to the latest development line?
Thanks in advance!
luigi
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - Luigi Campora Sirti S.p.A. TR-LH Divisione Trasporti Via Bombrini, 11/4 16149 Genova tel: +39 010 65948 36 fax: +39 010 65948 22 cell: +39 335 7470015 Web: www.sirti.it email: L.Campora@sirti.it - - - - - - - - - - - - - - - - - - - - - - - - - - - - -