On 3/21/24 3:45 PM, Mathieu Othacehe wrote:
Add USB support by enabling `usb` command and required USB drivers.
Signed-off-by: Mathieu Othacehe othacehe@gnu.org
configs/imx93-phyboard-segin_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-phyboard-segin_defconfig index 24f9bd553aa..0345e7deeab 100644 --- a/configs/imx93-phyboard-segin_defconfig +++ b/configs/imx93-phyboard-segin_defconfig @@ -67,6 +67,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_POWEROFF=y +CONFIG_CMD_USB=y CONFIG_CMD_SNTP=y CONFIG_CMD_CACHE=y CONFIG_CMD_EFIDEBUG=y @@ -132,6 +133,13 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y CONFIG_IMX_TMU=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="PHYTEC"
$ git grep -i usb.*phytec configs configs/phycore_pcl063_defconfig:CONFIG_USB_GADGET_MANUFACTURER="Phytec" configs/phycore_pcl063_ull_defconfig:CONFIG_USB_GADGET_MANUFACTURER="Phytec"
It would be good to be consistent.
Also, what is the vendor/product number those two boards use ?
Also, it would be good to fix the extra leading zero in those board boards vendor number, this, in both configs:
CONFIG_USB_GADGET_VENDOR_NUM=0x01b67