On 14-06-26 01:13 PM, Steve Rae wrote:
This series implements the "fastboot flash" command for eMMC devices. It supports both raw and sparse images.
NOTES:
- the support for the "fastboot flash" command is enabled with CONFIG_FASTBOOT_FLASH
- the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV
- (future) the support for NAND would be enabled with CONFIG_FASTBOOT_FLASH_NAND(???)
This has been tested on ARMv7.
Changes in v3:
- remove most references to 'mmc', which leaves only one mmc specific function: mmc_get_dev()
Changes in v2:
- split large function into three
- improved handling of response messages
- additional partition size checking when writing sparse image
- update README.android-fastboot file
- new in v2
Steve Rae (4): usb/gadget: fastboot: add sparse image definitions usb/gadget: fastboot: add eMMC support for flash command usb/gadget: fastboot: add support for flash command usb/gadget: fastboot: minor cleanup
README | 10 +++ common/Makefile | 5 ++ common/fb_mmc.c | 190 ++++++++++++++++++++++++++++++++++++++++ doc/README.android-fastboot | 5 +- drivers/usb/gadget/f_fastboot.c | 41 ++++++++- include/fb_mmc.h | 8 ++ include/sparse_format.h | 58 ++++++++++++ 7 files changed, 312 insertions(+), 5 deletions(-) create mode 100644 common/fb_mmc.c create mode 100644 include/fb_mmc.h create mode 100644 include/sparse_format.h
Marek, I notice that this patchset is assigned to you: http://patchwork.ozlabs.org/patch/364705/ Has there been any progress? Thanks, Steve