Adds doc/README.ti-secure file to explain in generic terms how boot images need to be created for secure devices from Texas Instruments.
Specific details for creating secure boot images for the AM43xx, DRA7xx and AM57xx secure devices from Texas Instruments are also provided in the README file.
Secure devices require a security development package (SECDEV) package that can be downloaded from:
http://www.ti.com/mysecuresoftware
Login is required and access is granted under appropriate NDA and export control restrictions.
Signed-off-by: Madan Srinivas madans@ti.com Signed-off-by: Daniel Allred d-allred@ti.com
Reviewed-by: Lokesh Vutla lokeshvutla@ti.com Reviewed-by: Andreas Dannenberg dannenberg@ti.com Reviewed-by: Tom Rini trini@konsulko.com ---
V3: None
V2: Minor whitespace fixes
doc/README.ti-secure | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 doc/README.ti-secure
diff --git a/doc/README.ti-secure b/doc/README.ti-secure new file mode 100644 index 0000000..7fc9b9b --- /dev/null +++ b/doc/README.ti-secure @@ -0,0 +1,91 @@ +README on how boot images are created for secure TI devices + +CONFIG_TI_SECURE_DEVICE: +Secure TI devices require a boot image that is authenticated by ROM +code to function. Without this, even JTAG remains locked and the +device is essentially useless. In order to create a valid boot image for +a secure device from TI, the initial public software image must be signed +and combined with various headers, certificates, and other binary images. + +Information on the details on the complete boot image format can be obtained +from Texas Instruments. The tools used to generate boot images for secure +devices are part of a secure development package (SECDEV) that can be +downloaded from: + + http://www.ti.com/mysecuresoftware (login required) + +The secure development package is access controlled due to NDA and export +control restrictions. Access must be requested and granted by TI before the +package is viewable and downloadable. Contact TI, either online or by way +of a local TI representative, to request access. + +When CONFIG_TI_SECURE_DEVICE is set, the U-Boot SPL build process requires +the presence and use of these tools in order to create a viable boot image. +The build process will look for the environment variable TI_SECURE_DEV_PKG, +which should be the path of the installed SECDEV package. If the +TI_SECURE_DEV_PKG variable is not defined or if it is defined but doesn't +point to a valid SECDEV package, a warning is issued during the build to +indicate that a final secure bootable image was not created. + +Within the SECDEV package exists an image creation script: + +${TI_SECURE_DEV_PKG}/scripts/create-boot-image.sh + +This is called as part of the SPL/u-boot build process. As the secure boot +image formats and requirements differ between secure SOC from TI, the +purpose of this script is to abstract these details as much as possible. + +The script is basically the only required interface to the TI SECDEV package +for secure TI devices. + +Invoking the script for AM43xx Secure Devices +============================================= + +create-boot-image.sh <IMAGE_FLAG> <INPUT_FILE> <OUTPUT_FILE> <SPL_LOAD_ADDR> + +<IMAGE_FLAG> is a value that specifies the type of the image to generate OR +the action the image generation tool will take. Valid values are: + SPI_X-LOADER - Generates an image for SPI flash (byte swapped) + XIP_X-LOADER - Generates a single stage u-boot for NOR/QSPI XiP + ISSW - Generates an image for all other boot modes + +<INPUT_FILE> is the full path and filename of the public world boot loader +binary file (depending on the boot media, this is usually either +u-boot-spl.bin or u-boot.bin). + +<OUTPUT_FILE> is the full path and filename of the final secure image. The +output binary images should be used in place of the standard non-secure +binary images (see the platform-specific user's guides and releases notes +for how the non-secure images are typically used) + u-boot-spl_HS_SPI_X-LOADER - byte swapped boot image for SPI flash + u-boot_HS_XIP_X-LOADER - boot image for NOR or QSPI flash + u-boot-spl_HS_ISSW - boot image for all other boot media + +<SPL_LOAD_ADDR> is the address at which SOC ROM should load the <INPUT_FILE> + +Invoking the script for DRA7xx/AM57xx Secure Devices +==================================================== + +create-boot-image.sh <IMAGE_TYPE> <INPUT_FILE> <OUTPUT_FILE> + +<IMAGE_TYPE> is a value that specifies the type of the image to generate OR +the action the image generation tool will take. Valid values are: + X-LOADER - Generates an image for NOR or QSPI boot modes + MLO - Generates an image for SD/MMC/eMMC boot modes + ULO - Generates an image for USB/UART peripheral boot modes + Note: ULO is not yet used by the u-boot build process + +<INPUT_FILE> is the full path and filename of the public world boot loader +binary file (for this platform, this is always u-boot-spl.bin). + +<OUTPUT_FILE> is the full path and filename of the final secure image. The +output binary images should be used in place of the standard non-secure +binary images (see the platform-specific user's guides and releases notes +for how the non-secure images are typically used) + u-boot-spl_HS_MLO - boot image for SD/MMC/eMMC. This image is + copied to a file named MLO, which is the name that + the device ROM bootloader requires for loading from + the FAT partition of an SD card (same as on + non-secure devices) + u-boot-spl_HS_X-LOADER - boot image for all other flash memories + including QSPI and NOR flash