The MACH_TYPE values for the omap37xx based platforms are no longer officially valid, so we must not set and pass them. In order to not reference them but still be able to set the default fdtfile based on the board detection logic we need to combine the two steps into one.
Cc: Adam Ford aford173@gmail.com Signed-off-by: Tom Rini trini@konsulko.com --- board/logicpd/omap3som/omap3logic.c | 54 ++++++++++++++----------------------- 1 file changed, 20 insertions(+), 34 deletions(-)
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index de6a06021c2c..21b3fdcf49cf 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -60,25 +60,28 @@ U_BOOT_DEVICE(omap3logic_uart) = { static struct board_id { char *name; int machine_id; + char *fdtfile; } boards[2][2] = { { { .name = "OMAP35xx SOM LV", .machine_id = MACH_TYPE_OMAP3530_LV_SOM, + .fdtfile = "logicpd-som-lv-35xx-devkit.dtb", }, { .name = "OMAP35xx Torpedo", .machine_id = MACH_TYPE_OMAP3_TORPEDO, + .fdtfile = "logicpd-torpedo-35xx-devkit.dtb", }, }, { { .name = "DM37xx SOM LV", - .machine_id = MACH_TYPE_DM3730_SOM_LV, + .fdtfile = "logicpd-som-lv-37xx-devkit.dtb", }, { .name = "DM37xx Torpedo", - .machine_id = MACH_TYPE_DM3730_TORPEDO, + .fdtfile = "logicpd-torpedo-37xx-devkit.dtb", }, }, }; @@ -165,14 +168,20 @@ int misc_init_r(void) */ int board_init(void) { - struct board_id *board; - unsigned int val; - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+ return 0; +} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + struct board_id *board; + unsigned int val; + /* * To identify between a SOM LV and Torpedo module, * a pulldown resistor is on hsusb0_data5 for the SOM LV module. @@ -207,39 +216,16 @@ int board_init(void) printf("Board: %s\n", board->name);
/* Set the machine_id passed to Linux */ - gd->bd->bi_arch_number = board->machine_id; + if (board->machine_id) + gd->bd->bi_arch_number = board->machine_id; + + /* If the user has not set fdtimage, set the default */ + if (!getenv("fdtimage")) + setenv("fdtimage", board->fdtfile); }
/* restore hsusb0_data5 pin as hsusb0_data5 */ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)); - - return 0; -} - -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) -{ - /* If we do not have an fdtimage, let's autodetect it*/ - if (getenv("fdtimage")) - return 0; - - switch (gd->bd->bi_arch_number) { - case MACH_TYPE_DM3730_TORPEDO: - setenv("fdtimage", "logicpd-torpedo-37xx-devkit.dtb"); - break; - case MACH_TYPE_DM3730_SOM_LV: - setenv("fdtimage", "logicpd-som-lv-37xx-devkit.dtb"); - break; - case MACH_TYPE_OMAP3_TORPEDO: - setenv("fdtimage", "logicpd-torpedo-35xx-devkit.dtb"); - break; - case MACH_TYPE_OMAP3530_LV_SOM: - setenv("fdtimage", "logicpd-som-lv-35xx-devkit.dtb"); - break; - default: - /* unknown machine type */ - break; - } return 0; } #endif