Sorry for duplication previous post.
If this configuration doesn't work, could you instruct how to write a driver for this dongle?
2012/11/18 valdez valdez valdez151@gmail.com:
Hello,
I tried use my USB ETH adapter. Following README files I addes into beagle.h file (my board is beagleboard) this:
#define CONFIG_USB_HOST_ETHER /* Enable USB Ethernet adapters */ #define CONFIG_USB_ETHER_ASIX /* Asix, or whatever driver(s) you want */
#define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP
#define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_BOOTPATH
and into asix.c file this:
{ 0x9710, 0x7830, FLAG_TYPE_AX88172},
I based on what my host Linux showed to me:
Vendor specific, USB Revision 2.0
- Moschip Semiconductor UA0025C 6e003e8f
- Class: Vendor specific
- PacketSize: 64 Configurations: 1
- Vendor: 0x9710 Product 0x7830 Version 1.0 Configuration: 1
- Interfaces: 1 Bus Powered Remote Wakeup 500mA Interface: 0
- Alternate Setting 0, Endpoints: 3
- Class Vendor specific
- Endpoint 1 In Bulk MaxPacket 512
- Endpoint 2 Out Bulk MaxPacket 512
- Endpoint 3 In Interrupt MaxPacket 16 Interval 1ms
But U-Boot don't see it as Ethernet Device, it only recognize it in tree:
(Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found OMAP3 beagleboard.org # usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Vendor specific (480 Mb/s, 500mA) Moschip Semiconductor UA0025C 6e003e8f
Could you help me with this, please?