Mahesh,
I am not aware of the GW2355 and if it was a custom design since Gateworks does do custom boards. For their current "retail" offerings I had posted a patch a few months ago:
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/30313/match=avila
Hope it helps.
-Ranjit
On 1/18/08 12:46 PM, "Mahesh Kumar" mkumar@solectek.sourceforge.net wrote:
Hi,
Has anybody done the u-boot porting on Avila platforms. I have GW2355, which is based on IXP425 CPU.
I have used the existing IXDP425 support from the u-boot, and could get the console messages till the prompt. But the problem is I could not write anything in the console. I could see that the serial_getc() is looping around to get a character in the UART receive buffer. Since the "data ready bit" is not set, the loop is like a forever type.
Any idea on this matter ?.
Thanks in advance.
Regards, Mahesh.
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users