1 Sep
2005
1 Sep
'05
8:43 p.m.
On Thursday 01 September 2005 20:42, Dan Malek wrote:
On Sep 1, 2005, at 6:43 AM, Alex Zeffertt wrote:
The problem I am seeing is that the bdi2000 cannot communicate with the PM828 if the HRW is not present in the flash device.
That doesn't sound quite right, but worst case all you need to do is pull RSTCONF to ground and the 82xx will use an internal configuration word to get you going.
Thanks.
-- Dan
Yes, that's absolutely true.
If your boot flash is not written correctly, you'd better have a way to pull RSTCONF low. Different BDI settings are required however, beware.
Regards
Pantelis