On 27.11.2019 14:44, Alexander Dahl wrote:
The SAMA5D2 and SAMA5D4 series SoCs have a 64-bit Serial Number (unique ID) burned in, which is displayed with 'print_cpuinfo()' now (in the same format the SAM-BA applet prints it).
Example output:
CPU: SAMA5D27 1G bits DDR2 SDRAM Serial number 0: 0x4630394b 1: 0x190d2750 Crystal frequency: 24 MHz CPU clock : 492 MHz Master clock : 164 MHz
Signed-off-by: Alexander Dahl ada@thorsis.com
I looked over lots of other 'print_cpuinfo()' implementations for different SoCs and found none printing a unique ID at all. Is there another place for this? Is it just few SoCs have such a serial number at all? Or is it not desired to print those along with the other CPU info?
Hi Alex,
I do not have anything against it. Nor do I have a strong opinion about which way to go. Is it better to just have a CMD that prints out this serial or print it at boot ? Maybe some other people have a different idea ?
Eugen
Greets Alex
arch/arm/mach-at91/armv7/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c index 5da067cda1..6d50e1aea4 100644 --- a/arch/arm/mach-at91/armv7/cpu.c +++ b/arch/arm/mach-at91/armv7/cpu.c @@ -13,6 +13,7 @@ #include <asm/arch/hardware.h> #include <asm/arch/at91_pit.h> #include <asm/arch/at91_gpbr.h> +#include <asm/arch/at91_sfr.h> #include <asm/arch/clk.h>
#ifndef CONFIG_SYS_AT91_MAIN_CLOCK @@ -42,9 +43,16 @@ void arch_preboot_os(void) #if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void) {
struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; char buf[32]; printf("CPU: %s\n", get_cpu_name());+#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D4)
printf("Serial number 0: 0x%08x\n", sfr->sn0);printf(" 1: 0x%08x\n", sfr->sn1);+#endif
printf("Crystal frequency: %8s MHz\n", strmhz(buf, get_main_clk_rate())); printf("CPU clock : %8s MHz\n",-- 2.20.1