Re: [U-Boot-Users] Ethernet port

Here in my board I have two Ethernet ports; So now I have to set two different IP addresses for these ports.

As when the U-Boot prompt comes up we can set the IP address as,

=> set ipaddr 10.128.19.1 => set ethaddr aa:bb:cc:ee:ff:gg

So above setting is valid only for single Ethernet port.

Yes.

My doubt how to set IP address for another Ethernet port or what is the method to do that?

Presently U-Boot supports only one active Ethernet configuration at a time. In case if you wish to use multiple ethernet ports with same or different IP/MAC addresses, it is _not_ possible. In case if you wish to test other ethernet ports, this can be done by changing the 'ethact' value. Though this cannot be done simultaneously.

Ramasamy C