Convert this driver to use the new driver model PCI API.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v2: - Fix use of 'pdev' instead of 'dev' - Get the vendor from the PCI parent platdata - Use pci_bus_find_bdf()
drivers/block/ahci.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++------ include/ahci.h | 4 +++ 2 files changed, 67 insertions(+), 7 deletions(-)
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 1ad638e..e5f4a04 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -10,6 +10,7 @@ #include <common.h>
#include <command.h> +#include <dm.h> #include <pci.h> #include <asm/processor.h> #include <asm/errno.h> @@ -168,9 +169,14 @@ int ahci_reset(void __iomem *base) static int ahci_host_init(struct ahci_probe_ent *probe_ent) { #ifndef CONFIG_SCSI_AHCI_PLAT +# ifdef CONFIG_DM_PCI + struct udevice *dev = probe_ent->dev; + struct pci_child_platdata *pplat = dev_get_parent_platdata(dev); +# else pci_dev_t pdev = probe_ent->dev; - u16 tmp16; unsigned short vendor; +# endif + u16 tmp16; #endif void __iomem *mmio = probe_ent->mmio_base; u32 tmp, cap_save, cmd; @@ -193,6 +199,14 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
#ifndef CONFIG_SCSI_AHCI_PLAT +# ifdef CONFIG_DM_PCI + if (pplat->vendor == PCI_VENDOR_ID_INTEL) { + u16 tmp16; + + dm_pci_read_config16(dev, 0x92, &tmp16); + dm_pci_write_config16(dev, 0x92, tmp16 | 0xf); + } +# else pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
if (vendor == PCI_VENDOR_ID_INTEL) { @@ -201,6 +215,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) tmp16 |= 0xf; pci_write_config_word(pdev, 0x92, tmp16); } +# endif #endif probe_ent->cap = readl(mmio + HOST_CAP); probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL); @@ -313,9 +328,15 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) tmp = readl(mmio + HOST_CTL); debug("HOST_CTL 0x%x\n", tmp); #ifndef CONFIG_SCSI_AHCI_PLAT +# ifdef CONFIG_DM_PCI + dm_pci_read_config16(dev, PCI_COMMAND, &tmp16); + tmp |= PCI_COMMAND_MASTER; + dm_pci_write_config16(dev, PCI_COMMAND, tmp16); +# else pci_read_config_word(pdev, PCI_COMMAND, &tmp16); tmp |= PCI_COMMAND_MASTER; pci_write_config_word(pdev, PCI_COMMAND, tmp16); +# endif #endif return 0; } @@ -324,7 +345,11 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) static void ahci_print_info(struct ahci_probe_ent *probe_ent) { #ifndef CONFIG_SCSI_AHCI_PLAT +# ifdef CONFIG_DM_PCI + struct udevice *dev = probe_ent->dev; +# else pci_dev_t pdev = probe_ent->dev; +# endif u16 cc; #endif void __iomem *mmio = probe_ent->mmio_base; @@ -350,7 +375,11 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) #ifdef CONFIG_SCSI_AHCI_PLAT scc_s = "SATA"; #else +# ifdef CONFIG_DM_PCI + dm_pci_read_config16(dev, 0x0a, &cc); +# else pci_read_config_word(pdev, 0x0a, &cc); +# endif if (cc == 0x0101) scc_s = "IDE"; else if (cc == 0x0106) @@ -395,7 +424,11 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) }
#ifndef CONFIG_SCSI_AHCI_PLAT -static int ahci_init_one(pci_dev_t pdev) +# ifdef CONFIG_DM_PCI +static int ahci_init_one(struct udevice *dev) +# else +static int ahci_init_one(pci_dev_t dev) +# endif { u16 vendor; int rc; @@ -407,7 +440,7 @@ static int ahci_init_one(pci_dev_t pdev) }
memset(probe_ent, 0, sizeof(struct ahci_probe_ent)); - probe_ent->dev = pdev; + probe_ent->dev = dev;
probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY @@ -417,18 +450,31 @@ static int ahci_init_one(pci_dev_t pdev) probe_ent->pio_mask = 0x1f; probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
- probe_ent->mmio_base = pci_map_bar(pdev, PCI_BASE_ADDRESS_5, +#ifdef CONFIG_DM_PCI + probe_ent->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5, + PCI_REGION_MEM); + + /* Take from kernel: + * JMicron-specific fixup: + * make sure we're in AHCI mode + */ + dm_pci_read_config16(dev, PCI_VENDOR_ID, &vendor); + if (vendor == 0x197b) + dm_pci_write_config8(dev, 0x41, 0xa1); +#else + probe_ent->mmio_base = pci_map_bar(dev, PCI_BASE_ADDRESS_5, PCI_REGION_MEM); - debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base);
/* Take from kernel: * JMicron-specific fixup: * make sure we're in AHCI mode */ - pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor); + pci_read_config_word(dev, PCI_VENDOR_ID, &vendor); if (vendor == 0x197b) - pci_write_config_byte(pdev, 0x41, 0xa1); + pci_write_config_byte(dev, 0x41, 0xa1); +#endif
+ debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base); /* initialize adapter */ rc = ahci_host_init(probe_ent); if (rc) @@ -915,7 +961,17 @@ void scsi_low_level_init(int busdevfunc) u32 linkmap;
#ifndef CONFIG_SCSI_AHCI_PLAT +# ifdef CONFIG_DM_PCI + struct udevice *dev; + int ret; + + ret = dm_pci_bus_find_bdf(busdevfunc, &dev); + if (ret) + return; + ahci_init_one(dev); +# else ahci_init_one(busdevfunc); +# endif #endif
linkmap = probe_ent->link_port_map; diff --git a/include/ahci.h b/include/ahci.h index 0bdedac..a956c6f 100644 --- a/include/ahci.h +++ b/include/ahci.h @@ -145,7 +145,11 @@ struct ahci_ioports { };
struct ahci_probe_ent { +#ifdef CONFIG_DM_PCI + struct udevice *dev; +#else pci_dev_t dev; +#endif struct ahci_ioports port[AHCI_MAX_PORTS]; u32 n_ports; u32 hard_port_no;