Hi Mark,
On Sat, 11 Sept 2021 at 13:18, Mark Kettenis mark.kettenis@xs4all.nl wrote:
From: Moiz Imtiaz moizimtiaz1@gmail.com Date: Sat, 11 Sep 2021 23:19:05 +0500
Hi Simon,
Thanks for the reply. I already followed the steps mentioned in "doc/uImage.FIT/beaglebone_vboot.txt".
I wonder if rpi is not using the devicetree compiled with U-Boot, but
instead one provided by the earlier-stage firmware?
Not sure, but seems like this is the case. I checked and there isn't any dtb or dts for rpi4 (bcm2711-rpi-4-b) in arc/arm/dts in u-boot. I tried to add the dtb and other dts dtsi https://github.com/raspberrypi/linux/tree/rpi-5.10.y/arch/arm64/boot/dts/broadcomfiles from the raspberry pi Linux and compile them with CONFIG_OF_SEPARATE and CONFIG_OF_EMBED (one at a time) *but it couldn't even boot the U-Boot and it would just give a blank screen*. I wonder why there isn't any device tree in the U-boot repo for RPI4. Is U-boot control FDT not supported by RPI4?
The issue with the rpi4 is that the addresses of devices move around based on the version of the Raspberry Pi firmware you're using. And possibly on the amount of memory on the board as well. So U-Boot pretty much has to use the device tree passed by the firmware since the device tree in the U-Boot tree would be wrong for many combinations of firmware and hardware.
Simon, this sort of thing is exactly the reason why I think the idea of having all U-Boot configuration information in a single device tree with the hardware description doesn't work everywhere.
From my reading of this thread, it rather reinforces the need to
provide a way to give U-Boot the config it needs, in the devicetree.
It seems that rpi is actually OK in this regard. If you think about it, it would be pretty hopeless if first-stage firmware assumed that it could provide a devicetree to whatever is next. For example, if U-Boot evolves to support more devices, they could not be supported. If UEFI is used, the devicetree would have no effect, since it doesn't support devicetree.
So perhaps the only remaining issue is with qemu on ARM / Risc-V?
Regards, Simon