These comments weren't push to mainline that's why remove them.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
arch/arm/dts/zynqmp-zcu208-revA.dts | 10 +++++----- arch/arm/dts/zynqmp-zcu216-revA.dts | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts index c24301090dde..cd2f02f21de5 100644 --- a/arch/arm/dts/zynqmp-zcu208-revA.dts +++ b/arch/arm/dts/zynqmp-zcu208-revA.dts @@ -424,27 +424,27 @@ si5341_2: out@2 { /* refclk2 for PS-GT, used for USB3 */ reg = <2>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; si5341_3: out@3 { /* refclk3 for PS-GT, used for SATA */ reg = <3>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; si5341_5: out@5 { /* refclk5 PL CLK100 */ reg = <5>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; si5341_6: out@6 { /* refclk6 PL CLK125 */ reg = <6>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; si5341_9: out@9 { /* refclk9 used for PS_REF_CLK 33.3 MHz */ reg = <9>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; }; }; diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts index 675baf4bed61..8aecb1529250 100644 --- a/arch/arm/dts/zynqmp-zcu216-revA.dts +++ b/arch/arm/dts/zynqmp-zcu216-revA.dts @@ -435,27 +435,27 @@ si5341_2: out@2 { /* refclk2 for PS-GT, used for USB3 */ reg = <2>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; si5341_3: out@3 { /* refclk3 for PS-GT, used for SATA */ reg = <3>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; si5341_5: out@5 { /* refclk5 PL CLK100 */ reg = <5>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; si5341_6: out@6 { /* refclk6 PL CLK125 */ reg = <6>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; si5341_9: out@9 { /* refclk9 used for PS_REF_CLK 33.3 MHz */ reg = <9>; - always-on; /* assigned-clocks does not enable, so do it here */ + always-on; }; }; };