From: Pali Rohár pali@kernel.org
This padding depends on board config file and therefore it makes the mkimage binary tool board specific, which is not correct. One cannot use mkimage tool built as a result for board A to generate images for board B, even if both A and B are on the same platform.
This CONFIG_SYS_U_BOOT_OFFS padding was needed when kwbimage v1 contained SPL code which loaded U-Boot proper based on CONFIG_SYS_U_BOOT_OFFS, instead of reading correct offset from kwbimage header.
Now that SPL code parses kwbimage header and deterinate correct offset, there is no need for this CONFIG_SYS_U_BOOT_OFFS padding anymore.
By removing it we also reduce the size of SPL code and therefore also decrease the final size of v1 kwbimage. This means there is more space for U-Boot proper binary.
Signed-off-by: Pali Rohár pali@kernel.org Reviewed-by: Marek Behún marek.behun@nic.cz Reviewed-by: Chris Packham judge.packham@gmail.com Reviewed-by: Stefan Roese sr@denx.de --- tools/Makefile | 4 ---- tools/kwbimage.c | 13 ------------- 2 files changed, 17 deletions(-)
diff --git a/tools/Makefile b/tools/Makefile index 35aefc207c..4a86321f64 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -169,10 +169,6 @@ HOST_EXTRACFLAGS += -DCONFIG_FIT_SIGNATURE_MAX_SIZE=0xffffffff HOST_EXTRACFLAGS += -DCONFIG_FIT_CIPHER endif
-ifneq ($(CONFIG_SYS_U_BOOT_OFFS),) -HOSTCFLAGS_kwbimage.o += -DCONFIG_SYS_U_BOOT_OFFS=$(CONFIG_SYS_U_BOOT_OFFS) -endif - # MXSImage needs LibSSL ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_TOOLS_LIBCRYPTO),) HOSTCFLAGS_kwbimage.o += \ diff --git a/tools/kwbimage.c b/tools/kwbimage.c index 9ecda861e4..ccb0b92266 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -979,19 +979,6 @@ static size_t image_headersz_v1(int *hasext) *hasext = 1; }
-#if defined(CONFIG_SYS_U_BOOT_OFFS) - if (headersz > CONFIG_SYS_U_BOOT_OFFS) { - fprintf(stderr, - "Error: Image header (incl. SPL image) too big!\n"); - fprintf(stderr, "header=0x%x CONFIG_SYS_U_BOOT_OFFS=0x%x!\n", - (int)headersz, CONFIG_SYS_U_BOOT_OFFS); - fprintf(stderr, "Increase CONFIG_SYS_U_BOOT_OFFS!\n"); - return 0; - } - - headersz = CONFIG_SYS_U_BOOT_OFFS; -#endif - /* * The payload should be aligned on some reasonable * boundary