Dear Fabio Estevam,
Hi,
Running U-boot 2013.04 on my mx23evk I get:
U-Boot 2013.04 (Apr 26 2013 - 10:44:46)
CPU: Freescale i.MX23 rev1.3 at 454 MHz BOOT: SSP SD/MMC #0 DRAM: 128 MiB MMC: MXS MMC: 0 In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 mmc0 is current device reading boot.scr ** Unable to read file boot.scr ** reading uImage 3258040 bytes read in 1112 ms (2.8 MiB/s) Booting from mmc ... reading imx23-evk.dtb 20944 bytes read in 33 ms (619.1 KiB/s) ## Booting kernel from Legacy Image at 42000000 ... Image Name: Linux-3.8.8-fslc+g7fd77a4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3257976 Bytes = 3.1 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Kernel Image ... OK OK Loading Device Tree to 47b72000, end 47b7a1cf ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
U-Boot 2013.04 (Apr 26 2013 - 10:44:46)
CPU: Freescale i.MX23 rev1.3 at 454 MHz BOOT: SSP SD/MMC #0 DRAM: 128 MiB
U-Boot 2013.04 (Apr 26 2013 - 10:44:46)
CPU: Freescale i.MX23 rev1.3 at 454 MHz BOOT: SSP SD/MMC #0 DRAM: 128 MiB
(Constantly resets)
Tried doing bisect to find out the offending commit, but I was getting some other issues on the way masking the boot problem.
Does anyone have any ideas?
Thanks,
Fabio Estevam
Did you apply that patch of mine ?
Best regards, Marek Vasut