Re: [U-Boot] [PATCH] at91: Factored out common serial hardware initialization

On 15:12 Fri 06 Feb , Michael Roth wrote:

Created a new function at91_serial_hw_init() which sets up the dedicated PIO pins of several at91 SoC according to CONFIG_USARTx.

Please note that the used pins for serial communication varies on different at91 SoC independently of the logic functionality equality of the serial hardware. But for each serial channel there is only one possibility for IO pin multiplexing so there is no need for board specific PIO setup. So the usage of SoC specific PIO setup is advisable.

Signed-off-by: Michael Roth mroth@nessie.de

please do remove my Copyright and orignial sob

I've done this for the serial to add multiple serial support please do not remvoe

Best Regards, J.