From: Quentin Schulz quentin.schulz@theobroma-systems.com
An earlier commit makes the common SPL code call regulators_enable_boot_on and regulators_enable_boot_off before iterating over possible boot media for U-Boot proper. There is therefore no need to do this in the rk3399-specific code, so let's remove it.
Cc: Quentin Schulz foss+uboot@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com ---
- This patch depends on https://lore.kernel.org/u-boot/20220715150949.952853-1-foss+uboot@0leil.net/ and https://lore.kernel.org/u-boot/20220715150949.952853-2-foss+uboot@0leil.net/
arch/arm/mach-rockchip/rk3399/rk3399.c | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index db8a6cb83a..691d69dc59 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -277,15 +277,5 @@ void spl_board_init(void) if (cru->glb_rst_st != 0) rk3399_force_power_on_reset(); } - - if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) { - /* - * Turning the eMMC and SPI back on (if disabled via the Qseven - * BIOS_ENABLE) signal is done through a always-on regulator). - */ - if (regulators_enable_boot_on(false)) - debug("%s: Cannot enable boot on regulator\n", - __func__); - } } #endif