[PATCH 11/11] arm64: zynqmp: Add support for zcu670-revB

RevB has different SD level shifter compare to revA. There are couple of changes between revisions but none of them requires SW alignment.

Signed-off-by: Michal Simek michal.simek@amd.com ---

arch/arm/dts/Makefile | 1 + arch/arm/dts/zynqmp-zcu670-revB.dts | 672 ++++++++++++++++++++++++++++ 2 files changed, 673 insertions(+) create mode 100644 arch/arm/dts/zynqmp-zcu670-revB.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 4c31a923aebc..fa65821ff475 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -448,6 +448,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-zcu208-revA.dtb \ zynqmp-zcu216-revA.dtb \ zynqmp-zcu670-revA.dtb \ + zynqmp-zcu670-revB.dtb \ zynqmp-zc1232-revA.dtb \ zynqmp-zc1254-revA.dtb \ zynqmp-zc1751-xm015-dc1.dtb \ diff --git a/arch/arm/dts/zynqmp-zcu670-revB.dts b/arch/arm/dts/zynqmp-zcu670-revB.dts new file mode 100644 index 000000000000..97599c5658fb --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu670-revB.dts @@ -0,0 +1,672 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP ZCU670 (67DR) revB + * + * (C) Copyright 2017 - 2022, Xilinx, Inc. + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * + * Michal Simek michal.simek@amd.com + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZCU670 RevB"; + compatible = "xlnx,zynqmp-zcu670-revB", "xlnx,zynqmp-zcu670", + "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + nvmem0 = &eeprom; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + spi0 = &qspi; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0 0 0 0x80000000>, <0x8 0x0 0x0 0x80000000>; + /* Another 4GB connected to PL */ + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + sw1 { + label = "sw1"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <BTN_MISC>; + wakeup-source; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat-led { + label = "heartbeat"; /* DS1 */ + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + ina226-vccint { + compatible = "iio-hwmon"; + io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>; + }; + ina226-vccint-io-bram-ps { + compatible = "iio-hwmon"; + io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>; + }; + ina226-vcc1v8 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>; + }; + ina226-vcc1v2 { + compatible = "iio-hwmon"; + io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>; + }; + ina226-vadj-fmc { + compatible = "iio-hwmon"; + io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>; + }; + ina226-mgtavcc { + compatible = "iio-hwmon"; + io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>; + }; + ina226-mgt1v2 { + compatible = "iio-hwmon"; + io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>; + }; + ina226-mgt1v8 { + compatible = "iio-hwmon"; + io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>; + }; + ina226-vccint-ams { + compatible = "iio-hwmon"; + io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>; + }; + ina226-dac-avtt { + compatible = "iio-hwmon"; + io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>; + }; + ina226-dac-avccaux { + compatible = "iio-hwmon"; + io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>; + }; + ina226-adc-avcc { + compatible = "iio-hwmon"; + io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>; + }; + ina226-adc-avccaux { + compatible = "iio-hwmon"; + io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>; + }; + ina226-dac-avcc { + compatible = "iio-hwmon"; + io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>; + }; + + /* 48MHz reference crystal */ + ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5381_6: si5381_6 { /* refclk_usb3 - u43 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u15 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */ + "QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */ + "QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */ + "I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */ + "", "", "BUTTON", "LED", "", /* 20 - 24 */ + "", "PMU_INPUT", "SFP3_TX_DISABLE", "SFP2_TX_DISABLE", "SFP1_TX_DISABLE", /* 25 - 29 */ + "SFP0_TX_DISABLE", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */ + "PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */ + "SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "SD_PWR_RST", "", /* 40 - 44 */ + "SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */ + "SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */ + "USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */ + "USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */ + "ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */ + "ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */ + "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */ + "", "", /* 78 - 79 */ + "", "", "", "", "", /* 80 - 84 */ + "", "", "", "", "", /* 85 - 89 */ + "", "", "", "", "", /* 90 - 94 */ + "", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 173 */ +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + tca6416_u15: gpio@20 { /* u15 */ + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */ + "SI5381_INT_ALM", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */ + "FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */ + "", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */ + }; + + i2c-mux@75 { /* u17 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + /* PMBUS_ALERT done via pca9544 */ + vccint: ina226@40 { /* u65 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vccint"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + vccint_io_bram_ps: ina226@41 { /* u57 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vccint-io-bram-ps"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + vcc1v8: ina226@42 { /* u60 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v8"; + reg = <0x42>; + shunt-resistor = <2000>; + }; + vcc1v2: ina226@43 { /* u58 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vcc1v2"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vadj_fmc: ina226@45 { /* u62 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vadj-fmc"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + mgtavcc: ina226@46 { /* u67 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-mgtavcc"; + reg = <0x46>; + shunt-resistor = <2000>; + }; + mgt1v2: ina226@47 { /* u63 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-mgt1v2"; + reg = <0x47>; + shunt-resistor = <5000>; /* Not in schematics */ + }; + mgt1v8: ina226@48 { /* u64 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-mgt1v8"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + vccint_ams: ina226@49 { /* u61 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-vccint-ams"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + dac_avtt: ina226@4a { /* u59 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-dac-avtt"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + dac_avccaux: ina226@4b { /* u124 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-dac-avccaux"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + adc_avcc: ina226@4c { /* u75 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-adc-avcc"; + reg = <0x4c>; + shunt-resistor = <5000>; + }; + adc_avccaux: ina226@4d { /* u71 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-adc-avccaux"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + dac_avcc: ina226@4e { /* u77 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-dac-avcc"; + reg = <0x4e>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* u104 - ir35215 0x10/0x40 */ + /* u127 - ir38164 0x1b/0x4b */ + /* u112 - ir38164 0x13/0x43 */ + /* u123 - ir38164 0x1c/0x4c */ + + irps5401_44: irps5401@44 { /* IRPS5401 - u53 */ + compatible = "infineon,irps5401"; + reg = <0x44>; /* i2c addr 0x14 */ + }; + irps5401_45: irps5401@45 { /* IRPS5401 - u55 */ + compatible = "infineon,irps5401"; + reg = <0x45>; /* i2c addr 0x15 */ + }; + /* J21 header too */ + + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* SYSMON */ + }; + }; + /* u38 MPS430 */ +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + i2c-mux@74 { + compatible = "nxp,pca9548"; /* u20 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ + i2c_eeprom: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u21 */ + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + i2c_si5381: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* SI5381 - u43 */ + /* si5381: clock-generator@68 { + reg = <0x68>; + };*/ + }; + i2c_si570_user_c0: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + clock-output-names = "si570_user_c0"; + }; + }; + i2c_si570_mgt: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <156250000>; + clock-output-names = "si570_mgt"; + }; + }; + i2c_8a34001: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* U409B - 8a34001 */ + }; + i2c_clk104: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* CLK104_SDA */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* RFMCP connector */ + }; + /* 7 NC */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u22 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* FMCP_HSPC_IIC */ + }; + i2c_si570_psrefclk: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si570_3: clock-generator@5d { /* USER SI570 PSREFCLK - u130 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <33333333>; + clock-frequency = <33333333>; + clock-output-names = "si570_ps_ref_clk"; + silabs,skip-recall; + }; + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SFP3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SFP2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SFP1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SFP0 */ + }; + }; + /* u38 MPS430 */ +}; + +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; +}; + +&qspi { + status = "okay"; + num-cs = <2>; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 2Gb */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0>, <1>; + parallel-memories = /bits/ 64 <0x10000000 0x10000000>; /* 256MB */ + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + +&rtc { + status = "okay"; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + disable-wp; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; + xlnx,mio-bank = <1>; + clk-phase-sd-hs = <120>, <60>; + clk-phase-uhs-sdr25 = <132>, <60>; + clk-phase-uhs-ddr50 = <153>, <48>; +}; + +&psgtr { + status = "okay"; + /* hspc_dp4, hspc_dp5, usb3, hspc_dp6 */ + clocks = <&si5381_6>; + clock-names = "ref2"; +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; +};