Hi,
I've got an sbc6000x from www.armkits.com. I've been working through how to put debian onto this board and was making some progress (im just a beginner), but now I dont have network access when at the U-boot prompt. The Board is connected to the network as the link light is on on the interface. As soon as I try to ping the board itself ie ping 192.192.192.200 (the default ip address) the link light goes out. this is from the command line
U-Boot> ping 192.192.192.200 dm9000 i/o: 0x30000000, id: 0x90000a46 DM9000: running in 16 bit mode MAC: de:ad:be:ef:01:01 operating at 100M full duplex mode ping failed; host 192.192.192.200 is not alive
now if I go ahead and boot the board i can ping once im in the linux root file system that is currently on the board (I've changed the IP address on bootup in the linux image.)
~ $ ping 192.168.0.21 PING 192.168.0.21 (192.168.0.21): 56 data bytes 64 bytes from 192.168.0.21: icmp_seq=0 ttl=64 time=0.5 ms 64 bytes from 192.168.0.21: icmp_seq=1 ttl=64 time=0.3 ms 64 bytes from 192.168.0.21: icmp_seq=2 ttl=64 time=0.3 ms
is there a setting in u-boot that could mean that the network is turned off?
following are the environment variables of u-boot
U-Boot> printenv bootcmd=nand read 0x22000000 0x1A0000 0x200000; bootm 0x22000000 bootdelay=3 baudrate=115200 ethaddr=DE:AD:BE:EF:01:01 ipaddr=192.192.192.200 serverip=192.192.192.105 gatewayip=192.192.192.101 netmask=255.255.255.0 splashimage=0x21000000 bootlogo=0 lcdtype=480x272 bootargs=console=ttyS0,115200 tft=480x272 root=/dev/mtdblock6 mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,1M(logo)ro,2M(linux),-(root) rw rootfstype=yaffs2
Environment size: 455/131067 bytes
im using u-boot 1.3.4.
Any help with this would be great!
Regards
Mark