Hi All, I am making some changes in the file "board/marvell/common/flash.c" as the Extra flash (other than the boot flash) which I would be using on my board is Intel's 28F256J3CI. In the file "board/marvell/common/flash.c" support for only two kinds of strata flash is there i.e "28F128J3A "and "8F640J3A" . For most of the flash memories there is a # define value in the file "include/flash.h". E.g for Intel's strata flash 28F128J3A #define INTEL_ID_28F128J3A 0x00180018 is there. Similarly for 28F256J3C (Intel Strata) flash, what value should be given to the #define INTEL_ID_28F256J3C in the file "include/flash.h"
Best Regards, Vikrant Basotra
************************************************************************** This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated. **************************************************************************