23 Sep
2009
23 Sep
'09
8:16 p.m.
On Tue, Sep 22, 2009 at 09:43:12PM +0200, Wolfgang Denk wrote:
Dear Scott Wood,
In message 20090911222349.GA26604@b07421-ec1.am.freescale.net you wrote:
On Mon, Sep 07, 2009 at 12:15:22AM +0100, kevin.morfitt@fearnside-systems.co.uk wrote:
This patch re-formats the arm920t s3c24x0 nand driver in preparation for changes to add support for the Embest SBC2440-II Board.
The changes are as follows:
- re-indent the code using Lindent
- make sure register layouts are defined using a C struct
- replace the upper-case typedef'ed C struct names with lower case
non-typedef'ed ones
- make sure registers are accessed using the proper accessor functions
- run checkpatch.pl and fix any error reports
It assumes the following patch has been applied first:
- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
- patches 1/4, 2/4 and 3/4 of this series
Acked-by: Scott Wood scottwood@freescale.com
What does that ACK mean? Who is supposed to apply this patch - the ARM custodian?
Yes, based on the rest of the patchset and "PATCH-ARM" I figured this would be going through the ARM tree.
-Scott