Configure the PL310 address filter to make sure DRAM is mapped to 0x0. This code also configures the "remap" register of NIC-301 and sets the required 'mpuzero' bit.
Signed-off-by: Marek Vasut marex@denx.de Cc: Chin Liang See clsee@altera.com Cc: Dinh Nguyen dinguyen@altera.com Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Tom Rini trini@ti.com Cc: Wolfgang Denk wd@denx.de Cc: Pavel Machek pavel@denx.de --- arch/arm/cpu/armv7/socfpga/misc.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c index 8e25f09..4ff8bd8 100644 --- a/arch/arm/cpu/armv7/socfpga/misc.c +++ b/arch/arm/cpu/armv7/socfpga/misc.c @@ -12,11 +12,17 @@ #include <asm/arch/reset_manager.h> #include <asm/arch/system_manager.h> #include <asm/arch/dwmmc.h> +#include <asm/arch/nic301.h> +#include <asm/pl310.h>
DECLARE_GLOBAL_DATA_PTR;
+static struct pl310_regs *const pl310 = + (struct pl310_regs *)CONFIG_SYS_PL310_BASE; static struct socfpga_system_manager *sysmgr_regs = (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; +static struct nic301_registers *nic301_regs = + (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
int dram_init(void) { @@ -129,6 +135,14 @@ static inline void socfpga_fpga_add(void) {}
int misc_init_r(void) { + /* Configure the L2 controller to make SDRAM start at 0 */ +#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET + writel(0x2, &nic301_regs->remap); +#else + writel(0x1, &nic301_regs->remap); /* remap.mpuzero */ + writel(0x1, &pl310->pl310_addr_filter_start); +#endif + /* Add device descriptor to FPGA device table */ socfpga_fpga_add();