Hello,
This is the second version of the patchset which adds support for the Toradex Colibri Vybrid VF50 and VF61 modules. Boot up has been tested using the serial loader over UART.
First patch in the series refactors the DDR related code for use by both the tower board and colibri modules. It also introduces a DDR3 based JEDEC timing structure.
Second third and fourth patch in this series are improvement patches related to RTC, SoC/CPU detection and caches.
Fifth patch introduces USB support for Vybrid modules. Much of the code is similar to the ehci-mx6 driver. One open question here would be is there a better way to take care of this similarity and perhaps share the code base among the two drivers? Both host and client modes are working and DFU has also been tested. Currently, we restrict the ports to be in one of host and client mode.
Sixth patch adds the actual support for the Colibri modules.
Comments and feedback are most welcome.
The patchset is based and tested on the latest master branch as of this writing.
Discussion on the version 1 of the patchset can be found at the below link: https://www.mail-archive.com/u-boot@lists.denx.de/msg168136.html
Changes since v1: - Rework the USB driver to use register offsets using the regular struct {} method - Some cleanups and fixes in the sixth patch for the colibri_vf.h file which takes care of environment variables in uboot - Purge some useless defines in the fifth and sixth patch which were related to USB.
- Sanchayan.
Sanchayan Maity (4): ARM: vf610: Move DDR3 initialization to imx-common ARM: vf610: Add SoC and CPU type detection usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's ARM: vf610: Initial integration for Colibri VF50/VF61
Stefan Agner (2): ARM: vf610: Enable external 32KHz oscillator ARM: vf610: Enable caches
arch/arm/Kconfig | 5 + arch/arm/cpu/armv7/vf610/generic.c | 45 ++- arch/arm/imx-common/Makefile | 3 + arch/arm/imx-common/ddrmc-vf610.c | 278 ++++++++++++++++++ arch/arm/include/asm/arch-vf610/crm_regs.h | 11 + arch/arm/include/asm/arch-vf610/ddrmc-vf610.h | 72 +++++ arch/arm/include/asm/arch-vf610/imx-regs.h | 36 ++- arch/arm/include/asm/arch-vf610/regs-usbphy.h | 31 +++ board/freescale/vf610twr/vf610twr.c | 295 +++++--------------- board/toradex/colibri_vf/Kconfig | 18 ++ board/toradex/colibri_vf/MAINTAINERS | 6 + board/toradex/colibri_vf/Makefile | 7 + board/toradex/colibri_vf/colibri_vf.c | 387 ++++++++++++++++++++++++++ board/toradex/colibri_vf/imximage.cfg | 17 ++ configs/colibri_vf_defconfig | 3 + drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-vf.c | 196 +++++++++++++ include/configs/colibri_vf.h | 271 ++++++++++++++++++ 18 files changed, 1447 insertions(+), 235 deletions(-) create mode 100644 arch/arm/imx-common/ddrmc-vf610.c create mode 100644 arch/arm/include/asm/arch-vf610/ddrmc-vf610.h create mode 100644 arch/arm/include/asm/arch-vf610/regs-usbphy.h create mode 100644 board/toradex/colibri_vf/Kconfig create mode 100644 board/toradex/colibri_vf/MAINTAINERS create mode 100644 board/toradex/colibri_vf/Makefile create mode 100644 board/toradex/colibri_vf/colibri_vf.c create mode 100644 board/toradex/colibri_vf/imximage.cfg create mode 100644 configs/colibri_vf_defconfig create mode 100644 drivers/usb/host/ehci-vf.c create mode 100644 include/configs/colibri_vf.h