On 2022/10/18 19:25, Johan Jonker wrote:
The phycore_rk3288 board has a SPL size problem, so remove phycore_init() function to stay within the limits.
This patch can reduce enough size to make the build pass.
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
Signed-off-by: Johan Jonker jbx6244@gmail.com
arch/arm/mach-rockchip/rk3288/Kconfig | 1 - board/phytec/phycore_rk3288/phycore-rk3288.c | 46 -------------------- 2 files changed, 47 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig index e8c57843..1be2b585 100644 --- a/arch/arm/mach-rockchip/rk3288/Kconfig +++ b/arch/arm/mach-rockchip/rk3288/Kconfig @@ -89,7 +89,6 @@ config TARGET_MIQI_RK3288 config TARGET_PHYCORE_RK3288 bool "phyCORE-RK3288" select BOARD_LATE_INIT
- select SPL_BOARD_INIT if SPL help Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination
diff --git a/board/phytec/phycore_rk3288/phycore-rk3288.c b/board/phytec/phycore_rk3288/phycore-rk3288.c index 17b987f6..3f49f39e 100644 --- a/board/phytec/phycore_rk3288/phycore-rk3288.c +++ b/board/phytec/phycore_rk3288/phycore-rk3288.c @@ -19,8 +19,6 @@ #include <netdev.h> #include <linux/bitops.h> #include "som.h" -#include <power/regulator.h> -#include <power/rk8xx_pmic.h>
static int valid_rk3288_som(struct rk3288_som *som) { @@ -77,47 +75,3 @@ int rk3288_board_late_init(void)
return 0; }
-#ifdef CONFIG_SPL_BUILD -#if !defined(CONFIG_SPL_OF_PLATDATA) -static int phycore_init(void) -{
- struct udevice *pmic;
- int ret;
- ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
- if (ret)
return ret;-#if defined(CONFIG_SPL_POWER)
- /* Increase USB input current to 2A */
- ret = rk818_spl_configure_usb_input_current(pmic, 2000);
- if (ret)
return ret;- /* Close charger when USB lower then 3.26V */
- ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
- if (ret)
return ret;-#endif
- return 0;
-} -#endif
-void spl_board_init(void) -{ -#if !defined(CONFIG_SPL_OF_PLATDATA)
- int ret;
- if (of_machine_is_compatible("phytec,rk3288-phycore-som")) {
ret = phycore_init();if (ret) {debug("Failed to set up phycore power settings: %d\n",ret);return;}- }
-#endif -} -#endif