Hi Heiko,
some additional comments on top of Bo's.
On 10/28/2013 06:45 AM, Bo Shen wrote:
Hi Heiko Schocher, Please add commit message.
On 10/22/2013 13:51, Heiko Schocher wrote:
Signed-off-by: Boris Schmidt boris.schmidt@siemens.com Reviewed-by: Heiko Schocher hs@denx.de Cc: Andreas Bießmann andreas.devel@googlemail.com
board/siemens/corvus/Makefile | 39 +++++ board/siemens/corvus/board.c | 345 ++++++++++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/corvus.h | 185 ++++++++++++++++++++++ 4 files changed, 570 insertions(+) create mode 100644 board/siemens/corvus/Makefile create mode 100644 board/siemens/corvus/board.c create mode 100644 include/configs/corvus.h
diff --git a/board/siemens/corvus/Makefile b/board/siemens/corvus/Makefile new file mode 100644 index 0000000..88981d8 --- /dev/null +++ b/board/siemens/corvus/Makefile @@ -0,0 +1,39 @@ +# +# Makefile for siemens CORVUS (AT91SAM9G45) based board +# (C) Copyright 2013 Siemens AG +# +# Based on: +# U-Boot file: board/atmel/at91sam9m10g45ek/Makefile +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop stelian@popies.net +# Lead Tech Design <www.leadtechdesign.com> +# +# SPDX-License-Identifier: GPL-2.0+ +#
+include $(TOPDIR)/config.mk
+LIB = $(obj)lib$(BOARD).o
+COBJS-y += board.o
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS))
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+#########################################################################
+# defines $(obj).depend target +include $(SRCTREE)/rules.mk
+sinclude $(obj).depend
+#########################################################################
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c new file mode 100644 index 0000000..1940da7 --- /dev/null +++ b/board/siemens/corvus/board.c @@ -0,0 +1,345 @@ +/*
- Board functions for Siemens CORVUS (AT91SAM9G45) based board
- (C) Copyright 2013 Siemens AG
- Based on:
- U-Boot file: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
- (C) Copyright 2007-2008
- Stelian Pop stelian@popies.net
- Lead Tech Design <www.leadtechdesign.com>
- SPDX-License-Identifier: GPL-2.0+
- */
+#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91sam9g45_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/clk.h> +#include <lcd.h> +#include <atmel_lcdc.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif +#include <netdev.h>
+DECLARE_GLOBAL_DATA_PTR;
+/*
*/ +/*
- Miscelaneous platform dependent initialisations
- */
I think this comment no meaning here.
+#ifdef CONFIG_CMD_NAND +static void corvus_nand_hw_init(void) +{
- struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
- struct at91_matrix *matrix = (struct at91_matrix
*)ATMEL_BASE_MATRIX;
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- unsigned long csa;
- /* Enable CS3 */
- csa = readl(&matrix->ebicsa);
- csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
- writel(csa, &matrix->ebicsa);
- /* Configure SMC CS3 for NAND/SmartMedia */
- writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),&smc->cs[3].setup);- writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),&smc->cs[3].pulse);- writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
&smc->cs[3].cycle);- writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
AT91_SMC_MODE_EXNW_DISABLE |+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_MODE_DBW_16 |+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_MODE_DBW_8 |+#endif
AT91_SMC_MODE_TDF_CYCLE(3),&smc->cs[3].mode);- writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
- /* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+} +#endif
+#ifdef CONFIG_CMD_USB +static void at91sam9m10g45ek_usb_hw_init(void) +{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- writel(1 << ATMEL_ID_PIODE, &pmc->pcer);
- at91_set_gpio_output(AT91_PIN_PD1, 0);
- at91_set_gpio_output(AT91_PIN_PD3, 0);
+} +#endif
+#ifdef CONFIG_MACB +static void corvus_macb_hw_init(void) +{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
- /* Enable clock */
- writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
- /*
* Disable pull-up on:* RXDV (PA15) => PHY normal mode (not Test mode)* ERX0 (PA12) => PHY ADDR0* ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0** PHY has internal pull-down*/- writel(pin_to_mask(AT91_PIN_PA15) |
pin_to_mask(AT91_PIN_PA12) |pin_to_mask(AT91_PIN_PA13),&pioa->pudr);Can we use GPIO API here?
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
AT91_RSTC_MR_URSTEN, &rstc->mr);- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
;Add timeout here.
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
&rstc->mr);- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PA15) |
pin_to_mask(AT91_PIN_PA12) |pin_to_mask(AT91_PIN_PA13),&pioa->puer);Can we use GPIO API here?
- /* And the pins. */
- at91_macb_hw_init();
+} +#endif
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = { +vl_col: 480, +vl_row:272, +vl_clk:9000000, +vl_sync : ATMEL_LCDC_INVLINE_NORMAL |
ATMEL_LCDC_INVFRAME_NORMAL,+vl_bpix:3, +vl_tft:1, +vl_hsync_len:45, +vl_left_margin:1,
- vl_right_margin:1,
+vl_vsync_len:1,
- vl_upper_margin:40,
- vl_lower_margin:1,
- mmio : ATMEL_BASE_LCDC,
+};
Change to use ".xxx = xxx", e.g: .vl_col = 480.
+void lcd_enable(void) +{
- at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */
+}
+void lcd_disable(void) +{
- at91_set_A_periph(AT91_PIN_PE6, 0); /* power down */
+}
+static void corvus_lcd_hw_init(void) +{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
- at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
- at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
- at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
- at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
- at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
- at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */
There should be A peripheral.
- at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
- at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
- at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */
Ditto.
- at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
- writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
- gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE;
+}
+#ifdef CONFIG_LCD_INFO +#include <nand.h> +#include <version.h>
+void lcd_show_board_info(void) +{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("(C) 2009 Siemens SBT\n");
Remove the "(C)".
- lcd_printf("www.sbt.siemens.com\n");
- lcd_printf("%s CPU at %s MHz\n",
ATMEL_CPU_NAME,strmhz(temp, get_cpu_clk_rate()));- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
dram_size += gd->bd->bi_dram[i].size;- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
nand_size += nand_info[i].size;- lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
dram_size >> 20,nand_size >> 20);+} +#endif /* CONFIG_LCD_INFO */ +#endif
+int board_early_init_f(void) +{
- at91_seriald_hw_init();
- return 0;
+}
+int board_init(void) +{
- /* Enable Ctrlc */
- console_init_f();
Remove it.
- /* arch number of corvus-Board */
- gd->bd->bi_arch_number = MACH_TYPE_CORVUS;
move to board related configuration file.
- /* adress of boot parameters */
s/adress/address
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; +
- board_early_init_f();
Why call board_early_init_f() here? Isn't it called bby generic board code in the init_sequence_f[] when CONFIG_BOARD_EARLY_INIT_F is defined?
+#ifdef CONFIG_CMD_NAND
- corvus_nand_hw_init();
+#endif +#ifdef CONFIG_HAS_DATAFLASH
Isn't SPI required for dataflash? Consider rearrange the ifdiffery here.
- at91_spi0_hw_init(1 << 0);
+#endif +#ifdef CONFIG_ATMEL_SPI
- at91_spi0_hw_init(1 << 4);
+#endif +#ifdef CONFIG_MACB
- corvus_macb_hw_init();
+#endif +#ifdef CONFIG_LCD
- corvus_lcd_hw_init();
+#endif +#ifdef CONFIG_CMD_USB
- at91sam9m10g45ek_usb_hw_init();
+#endif
- return 0;
+}
+int dram_init(void) +{
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);- return 0;
+}
+#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB
- /*
* Initialize ethernet HW addr prior to starting Linux,* needed for nfsroot*/- eth_init(gd->bd);
+#endif
Please remove this, more information: --->8--- commit 6bb46790178d111161a487cbd847dd2dba37ca24 Author: Ben Warren biggerbadderben@gmail.com Date: Tue Jun 1 11:55:42 2010 -0700
Write MAC address automatically on MACB-based boards Also, remove all calls to eth_init() in boards that use MACB---8<---
+} +#endif
+int board_eth_init(bd_t *bis) +{
- int rc = 0;
+#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
+#endif
- return rc;
+}
+/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI
I think this is not required, should be catched by garbage collector.
+#include <spi.h>
+int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{
- return bus == 0 && cs < 2;
+}
+void spi_cs_activate(struct spi_slave *slave) +{
- switch (slave->cs) {
- case 1:
at91_set_gpio_output(AT91_PIN_PB18, 0);break;- case 0:
- default:
at91_set_gpio_output(AT91_PIN_PB3, 0);break;- }
+}
+void spi_cs_deactivate(struct spi_slave *slave) +{
- switch (slave->cs) {
- case 1:
at91_set_gpio_output(AT91_PIN_PB18, 1);break;- case 0:
- default:
at91_set_gpio_output(AT91_PIN_PB3, 1);break;- }
+} +#endif /* CONFIG_ATMEL_SPI */ diff --git a/boards.cfg b/boards.cfg index e693105..72d82b2 100644 --- a/boards.cfg +++ b/boards.cfg @@ -140,6 +140,7 @@ Active arm arm926ejs at91 ronetix pm9g45 Active arm arm926ejs at91 taskit stamp9g20 portuxg20 stamp9g20:AT91SAM9G20,PORTUXG20 Markus Hubig mhubig@imko.de Active arm arm926ejs at91 taskit stamp9g20 stamp9g20 stamp9g20:AT91SAM9G20 Markus Hubig mhubig@imko.de Active arm arm926ejs at91 siemens taurus axm taurus:AT91SAM9G20,MACH_TYPE=2068 Heiko Schocher hs@denx.de +Active arm arm926ejs at91 siemens corvus corvus corvus:AT91SAM9M10G45,SYS_USE_NANDFLASH Heiko Schocher hs@denx.de Active arm arm926ejs at91 siemens taurus taurus taurus:AT91SAM9G20,MACH_TYPE=2067 Heiko Schocher hs@denx.de Active arm arm926ejs davinci ait cam_enc_4xx cam_enc_4xx cam_enc_4xx Heiko Schocher hs@denx.de Active arm arm926ejs davinci Barix ipam390 ipam390
Heiko Schocher hs@denx.de diff --git a/include/configs/corvus.h b/include/configs/corvus.h new file mode 100644 index 0000000..09513f9 --- /dev/null +++ b/include/configs/corvus.h @@ -0,0 +1,185 @@ +/*
- Common board functions for siemens AT91SAM9G45 based boards
- (C) Copyright 2013 Siemens AG
- Based on:
- U-Boot file: include/configs/at91sam9m10g45ek.h
- (C) Copyright 2007-2008
- Stelian Pop stelian@popies.net
- Lead Tech Design <www.leadtechdesign.com>
- SPDX-License-Identifier: GPL-2.0+
- */
remove some of the new lines here.
+#ifndef __CONFIG_H +#define __CONFIG_H
+#include <asm/hardware.h>
+#define MACH_TYPE_CORVUS 2066
+/*
- Warning: changing CONFIG_SYS_TEXT_BASE requires
- adapting the initial boot program.
- Since the linker has to swallow that define, we must use a pure
- hex number here!
- */
+#define CONFIG_SYS_TEXT_BASE 0x73f00000
Is'nt the RAM placed @0x20000000 for this devices? Ah got it, The sam9m10 has DDR1 @CS0 and DDR0 @CS6
+#define CONFIG_AT91_LEGACY +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
The ATMEL_LEGACY is required for dataflash, please consider using the generic mtd sf stuff instead.
+/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000
+#define CONFIG_AT91SAM9M10G45EK
No need this define.
+#define CONFIG_AT91FAMILY
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT
+/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO +#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
+/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS
replace tab with black space.
+/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO +#undef LCD_TEST_PATTERN
No where define it, remove it.
+#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_LCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +/* board specific(not enough SRAM) */ +#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000
+/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ +#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */
Would you mind to use the generic gpio led stuff instead?
+#define CONFIG_BOOTDELAY 3
+/*
- BOOTP options
- */
+#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME
+/*
- Command line configuration.
- */
+#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_USB
+/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+/* No NOR flash */ +#define CONFIG_SYS_NO_FLASH
+/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
+#endif
+/* Ethernet */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R
+/* USB */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 +#define CONFIG_DOS_PARTITION +#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
Does this work on your board?
;) good catch ...
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000
Ditto.
+/* bootstrap + u-boot + env in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET_REDUND 0x180000 +#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_BOOTCOMMAND \
- "nand read 0x70000000 0x200000 0x300000;" \
nand read ${laodaddr} kernel ?
When using mtdparts in u-boot ... just my 2¢
- "bootm 0x70000000"
+#define CONFIG_BOOTARGS \
- "console=ttyS0,115200 earlyprintk " \
- "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
- "256k(env),256k(env_redundant),256k(spare)," \
- "512k(dtb),6M(kernel)ro,-(rootfs) " \
- "root=/dev/mtdblock7 rw rootfstype=jffs2"
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)+#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER
+/*
- Size of malloc() pool
- */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
128*1024, 0x1000)+#endif
Best regards
Andreas Bießmann