From: Sinthu Raja sinthu.raja@ti.com
Hi All, This series of patch add initial support for AM68 starter kit. Design files can be referrred from https://www.ti.com/lit/zip/SPRR463
Refer below link to J721S2/AM68 Technical Reference Manual for further details: http://www.ti.com/lit/pdf/spruj28
Link to kerenl patches: https://lore.kernel.org/linux-arm-kernel/20221115154832.19759-4-sinthu.raja@...
Changes in V5: ============= Address review comments: - Add comment as per the review comment.
Changes in V4: ============= Address review comments: - In align wih the macro conditional statement which missed it in the previous version
Changes in V3: ============= Address review comments: - Rework on DTB selection API clarity about mini-U-Boot vs EVM and family support as suggested. * board: ti: j721s2: Add board_init and support for selecting DT based on EEPROM
Changes in V2: ============= Address review comments: - Remove support for detecting multiple device trees using different DTB - Remove board specific API from K3 generic file (arch/arm/mach-k3/j721s2_init.c) and moved to board specific file (board/ti/j721s2/evm.c). * arch: mach-k3: Update board specific API name to K3 generic API name * board: ti: j721s2: Add board_init and support for selecting DT based on EEPROM - Move board_is_xxx within CONFIG_TI_I2C_BOARD_DETECT block to maintain the "mini" U-Boot concept for this SoC.
V1: https://patchwork.ozlabs.org/project/uboot/cover/20221027104846.11820-1-sint... V2: https://patchwork.ozlabs.org/project/uboot/cover/20221221135219.24702-1-sint... V3: https://patchwork.ozlabs.org/project/uboot/cover/20221227121543.22306-1-sint... V4: https://patchwork.ozlabs.org/project/uboot/cover/20230104094350.19394-1-sint...
Sinthu Raja (12): configs: j721s2_evm_r5: Enable support for building multiple dtbs into FIT configs: j721s2_evm_a72: Enable support for building multiple dtbs into FIT configs: j721s2_evm: Enable configs to store env in MMC FAT partition board: ti: j721s2: Add support to update board_name for am68-sk board: ti: j721s2: Enable support for reading EEPROM at next alternate address board: ti: j721s2: Add support for detecting multiple device trees arch: mach-k3: Update board specific API name to K3 generic API name board: ti: j721s2: Add board_init and support for selecting DT based on EEPROM arm: dts: Add initial support for AM68 Starter Kit System on Module arm: dts: Add support for A72 specific AM68 Starter Kit Base Board arm: dts: k3-am68-sk: Add r5 specific dt support include: configs: Update env for selecting right dtb
arch/arm/dts/Makefile | 4 +- .../arm/dts/k3-am68-sk-base-board-u-boot.dtsi | 150 ++++++++ arch/arm/dts/k3-am68-sk-base-board.dts | 353 ++++++++++++++++++ arch/arm/dts/k3-am68-sk-r5-base-board.dts | 194 ++++++++++ arch/arm/dts/k3-am68-sk-som.dtsi | 127 +++++++ arch/arm/mach-k3/include/mach/sys_proto.h | 3 + arch/arm/mach-k3/j721s2_init.c | 13 +- board/ti/j721s2/evm.c | 122 +++++- configs/j721s2_evm_a72_defconfig | 4 +- configs/j721s2_evm_r5_defconfig | 4 + include/configs/j721s2_evm.h | 4 + 11 files changed, 960 insertions(+), 18 deletions(-) create mode 100644 arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi create mode 100644 arch/arm/dts/k3-am68-sk-base-board.dts create mode 100644 arch/arm/dts/k3-am68-sk-r5-base-board.dts create mode 100644 arch/arm/dts/k3-am68-sk-som.dtsi