The function pcr_clrsetbits32() expects a device with a P2SB parent device. In intel_gpio_direction_output() and intel_gpio_set_value() the device 'dev' is passed to pcr_clrsetbits32(), which is a gpio-controller with a device 'pinctrl' as parent. This does not match the expectations of pcr_clrsetbits32(). But the 'pinctrl' device has a P2SB as parent.
Pass the 'pinctrl' device instead of the 'dev' device to pcr_clrsetbits32().
Signed-off-by: Wolfgang Wallner wolfgang.wallner@br-automation.com
---
Changes in v2: - Fixed typo in the commit description - Fixed the same error in both intel_gpio_direction_output() and intel_gpio_set_value() (Thanks to Bin Meng for catching this) - Reworded commit description
drivers/gpio/intel_gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/intel_gpio.c b/drivers/gpio/intel_gpio.c index 4bf1c9ddc4..b05cfc4aed 100644 --- a/drivers/gpio/intel_gpio.c +++ b/drivers/gpio/intel_gpio.c @@ -39,7 +39,7 @@ static int intel_gpio_direction_output(struct udevice *dev, uint offset, struct udevice *pinctrl = dev_get_parent(dev); uint config_offset = intel_pinctrl_get_config_reg_addr(pinctrl, offset);
- pcr_clrsetbits32(dev, config_offset, + pcr_clrsetbits32(pinctrl, config_offset, PAD_CFG0_MODE_MASK | PAD_CFG0_RX_STATE | PAD_CFG0_TX_DISABLE, PAD_CFG0_MODE_GPIO | PAD_CFG0_RX_DISABLE | @@ -72,7 +72,7 @@ static int intel_gpio_set_value(struct udevice *dev, unsigned offset, int value) struct udevice *pinctrl = dev_get_parent(dev); uint config_offset = intel_pinctrl_get_config_reg_addr(pinctrl, offset);
- pcr_clrsetbits32(dev, config_offset, PAD_CFG0_TX_STATE, + pcr_clrsetbits32(pinctrl, config_offset, PAD_CFG0_TX_STATE, value ? PAD_CFG0_TX_STATE : 0);
return 0;