Hi Peng,
On Mon, May 11, 2020 at 3:55 AM Peng Fan peng.fan@nxp.com wrote:
Simplify board SPL code
- BSS area will be cleared by crt0_64.S
- No need to get ccm device in spl_board_init
- Use spl_early_init, not spl_init
- timer_init has been invoked in arch_cpu_init
These are several changes in the same patch. It would be better to split them.
Signed-off-by: Peng Fan peng.fan@nxp.com
V2: Fix build warning
board/freescale/imx8mp_evk/spl.c | 30 ++---------------------------- 1 file changed, 2 insertions(+), 28 deletions(-)
diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c index c5f640dc7b..7b02f43d95 100644 --- a/board/freescale/imx8mp_evk/spl.c +++ b/board/freescale/imx8mp_evk/spl.c @@ -25,11 +25,6 @@ #include <mmc.h> #include <asm/arch/ddr.h>
-#include <dm/uclass.h> -#include <dm/device.h> -#include <dm/uclass-internal.h> -#include <dm/device-internal.h>
DECLARE_GLOBAL_DATA_PTR;
int spl_board_boot_device(enum boot_device boot_dev_spl) @@ -44,16 +39,7 @@ void spl_dram_init(void)
void spl_board_init(void) {
struct udevice *dev;int ret;puts("Normal Boot\n");ret = uclass_get_device_by_name(UCLASS_CLK,"clock-controller@30380000",&dev);
We need this for the SPL watchdog driver, no?
I tried selecting CONFIG_SPL_CLK_IMX8MP=y and then the board does not boot anymore, so it looks like we need a better solution.
if (ret < 0)printf("Failed to find clock node. Check device tree\n");}
#define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PE) @@ -114,29 +100,19 @@ int board_fit_config_name_match(const char *name) } #endif
+/* Do not use BSS area in this phase */ void board_init_f(ulong dummy) {
int ret;arch_cpu_init(); init_uart_clk(1); board_early_init_f();timer_init();
spl_early_init();
You should check the returned value from spl_early_init().
If you send a v2, could you please:
Thanks