Hello Gaurav,
-----Original Message----- From: Gaurav Jain gaurav.jain@nxp.com Sent: Wednesday, November 17, 2021 12:26 PM To: ZHIZHIKIN Andrey andrey.zhizhikin@leica-geosystems.com; u- boot@lists.denx.de Cc: Stefano Babic sbabic@denx.de; Fabio Estevam festevam@gmail.com; Peng Fan peng.fan@nxp.com; Simon Glass sjg@chromium.org; Priyanka Jain priyanka.jain@nxp.com; Ye Li ye.li@nxp.com; Horia Geanta horia.geanta@nxp.com; Ji Luo ji.luo@nxp.com; Franck Lenormand franck.lenormand@nxp.com; Silvano Di Ninno silvano.dininno@nxp.com; Sahil Malhotra sahil.malhotra@nxp.com; Pankaj Gupta pankaj.gupta@nxp.com; Varun Sethi V.Sethi@nxp.com; dl-uboot-imx uboot-imx@nxp.com; Shengzhou Liu shengzhou.liu@nxp.com; Mingkai Hu mingkai.hu@nxp.com; Rajesh Bhagat rajesh.bhagat@nxp.com; Meenakshi Aggarwal meenakshi.aggarwal@nxp.com; Wasim Khan wasim.khan@nxp.com; Alison Wang alison.wang@nxp.com; Pramod Kumar pramod.kumar_1@nxp.com; Andy Tang andy.tang@nxp.com; Adrian Alonso adrian.alonso@nxp.com; Vladimir Oltean olteanv@gmail.com Subject: RE: [EXT] RE: [PATCH v5 01/16] crypto/fsl: Add support for CAAM Job ring driver model
Hello Andrey
-----Original Message----- From: ZHIZHIKIN Andrey andrey.zhizhikin@leica-geosystems.com Sent: Tuesday, November 16, 2021 9:24 PM To: Gaurav Jain gaurav.jain@nxp.com; u-boot@lists.denx.de Cc: Stefano Babic sbabic@denx.de; Fabio Estevam festevam@gmail.com; Peng Fan peng.fan@nxp.com; Simon Glass sjg@chromium.org; Priyanka Jain priyanka.jain@nxp.com; Ye Li ye.li@nxp.com; Horia Geanta horia.geanta@nxp.com; Ji Luo ji.luo@nxp.com; Franck Lenormand franck.lenormand@nxp.com; Silvano Di Ninno silvano.dininno@nxp.com; Sahil Malhotra sahil.malhotra@nxp.com; Pankaj Gupta pankaj.gupta@nxp.com; Varun Sethi V.Sethi@nxp.com; dl-uboot-imx uboot-imx@nxp.com; Shengzhou Liu shengzhou.liu@nxp.com; Mingkai Hu mingkai.hu@nxp.com; Rajesh Bhagat rajesh.bhagat@nxp.com; Meenakshi Aggarwal meenakshi.aggarwal@nxp.com; Wasim Khan wasim.khan@nxp.com; Alison Wang alison.wang@nxp.com; Pramod Kumar pramod.kumar_1@nxp.com; Andy Tang andy.tang@nxp.com; Adrian Alonso adrian.alonso@nxp.com; Vladimir Oltean olteanv@gmail.com Subject: [EXT] RE: [PATCH v5 01/16] crypto/fsl: Add support for CAAM Job ring driver model
Caution: EXT Email
Hello Gaurav,
-----Original Message----- From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Gaurav Jain Sent: Monday, November 15, 2021 8:00 AM To: u-boot@lists.denx.de Cc: Stefano Babic sbabic@denx.de; Fabio Estevam festevam@gmail.com; Peng Fan peng.fan@nxp.com; Simon Glass sjg@chromium.org; Priyanka Jain priyanka.jain@nxp.com; Ye Li ye.li@nxp.com; Horia Geanta horia.geanta@nxp.com; Ji Luo ji.luo@nxp.com; Franck Lenormand franck.lenormand@nxp.com; Silvano Di Ninno silvano.dininno@nxp.com; Sahil malhotra sahil.malhotra@nxp.com; Pankaj Gupta pankaj.gupta@nxp.com; Varun Sethi V.Sethi@nxp.com; NXP i . MX U-Boot Team uboot-imx@nxp.com; Shengzhou Liu Shengzhou.Liu@nxp.com; Mingkai Hu mingkai.hu@nxp.com; Rajesh Bhagat rajesh.bhagat@nxp.com;
Meenakshi
Aggarwal meenakshi.aggarwal@nxp.com; Wasim Khan wasim.khan@nxp.com; Alison Wang alison.wang@nxp.com; Pramod
Kumar
pramod.kumar_1@nxp.com; Tang Yuantian andy.tang@nxp.com; Adrian Alonso adrian.alonso@nxp.com; Vladimir Oltean olteanv@gmail.com; Gaurav Jain gaurav.jain@nxp.com Subject: [PATCH v5 01/16] crypto/fsl: Add support for CAAM Job ring driver model
added device tree support for job ring driver. sec is initialized based on job ring information processed from device tree.
Signed-off-by: Gaurav Jain gaurav.jain@nxp.com Reviewed-by: Ye Li ye.li@nxp.com
cmd/Kconfig | 1 + drivers/crypto/fsl/Kconfig | 7 + drivers/crypto/fsl/Makefile | 4 +- drivers/crypto/fsl/jr.c | 316 +++++++++++++++++++++++------------- drivers/crypto/fsl/jr.h | 14 ++ 5 files changed, 232 insertions(+), 110 deletions(-)
[snip]
sec_out32(&sec->mcfgr, mcr);+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX8M)
This would effectively reserve the JR0 on _all_ i.MX8M derivatives is S World.
This code is to set any JR DID in SPL so that the job ring can be configured.
Current implementation only has JR0 reserved in S World on imx8mm derivative, but this new addition extends this to imx8mn, imx8mp and imx8mq.
Current implementation do not initialize CAAM for i.MX8M derivatives. It is not based on driver model approach and only using JR0.
OK, but then I do not have on explanation on why do I see following results from reading JRaDID_MS registers on imx8m derivatives: - imx8mm: JR0DID_MS = 0x8011 JR1DID_MS = 0x0 JR2DID_MS = 0x0 - imx8mn: JR0DID_MS = 0x0 JR1DID_MS = 0x0 JR2DID_MS = 0x0 - imx8mp: JR0DID_MS = 0x0 JR1DID_MS = 0x0 JR2DID_MS = 0x0
This readout is taken at Kernel boot, and it clearly shows that only JR0 has TZ_OWN, PRIM_TZ and PRIM_DID bits set, and it is only done on imx8mm.
With New implementation CAAM is enabled for i.MX8M derivative. Any JR whose DID is written in ATF, can be used in Uboot. JR0 is reserved for HAB so JR1 will be used for all i.MX8M derivatives.
I'm wondering about several points here:
- Why does current implementation on have this reservation done on imx8mm
and where does this happen? None of the code pieces suggests that it is done in U-Boot, is it performed in BootROM?
I cannot see if current implementation(SPL/Uboot) has reservation done for imx8mm. In ATF, we are reserving the JR0.
I was not able to identify which part of ATF code is responsible to program JR0DID_MS on imx8mm, the only thing I saw was the part where the JR0 is held in S World *if* the JR0DID_MS is set to 0x8011. Can you point out where is this performed in ATF code?
If it is not in the ATF, then my question above still stands: which component (HW or SW) programs JR0DID_MS, and why is it only done on imx8mm derivative?
- What is the intention of having JR0 reserved for all derivatives? Is this the part of a bigger change that stretches across different SW components (e.g. ATF, OP-TEE, etc.)? If that is the case - then a more detailed description would be appreciated here.
ATF code already accounts for this reservation in commit: a83a7c65e ("TEE-639 plat: imx8m: Do not release JR0 to NS if HAB is using it") [1], but there is no description on why is this required though.
If this is required for HAB feature, then the question is: should it be kept in
S
World when U-Boot starts, or SPL can release it after the binary is verified
and
crypto facilities are not in use anymore?
Commit: a83a7c65e reserves JR0 for HAB and not released to NS but JR1, JR2 are released to NS.
Then I believe this change should be in-sync with ATF implementation, because of the fact that your change can have any arbitrary JR to be held in S World.
What would happen if for example JR1 is programmed with TZ_OWN, but ATF releases it to NS world? Can it be used by Kernel afterwards? Or should the node be disabled here so that Kernel does not even see JR1 during boot?
So far, ATF only examines the JR0DID_MS content, and not all the others...
HAB uses JR0 for secure boot on all i.MX8M derivatives. Uboot calls HAB API for authenticating kernel.
This implies then that the JR0 is permanently held in S World and stays there for entire device powercycle and cannot be reclaimed in NS World? In this case, the DT node should be completely removed from DTB file so no SW entity can even see it (as it is in a total possession of HW mechanisms).
jrdid_ms = JRDID_MS_TZ_OWN | JRDID_MS_PRIM_TZ |- JRDID_MS_PRIM_DID;
What is the intention of setting JRDID_MS_PRIM_TZ? Isn't setting JRDID_MS_TZ_OWN would be sufficient here?
PRIM_TZ bit is set to 1 to indicate that only SecureWorld can access registers in that Job Ring's register page
But would it not be enough just to set TZ_OWN? If I read SRM correct: only TZ_OWN is enough to hold the JR in S World.
[snip]
-- andrey