Change pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com Reviewed-by: Patrice Chotard patrice.chotard@st.com ---
(no changes since v1)
drivers/phy/phy-stm32-usbphyc.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c index 9d4296d649..2b69514b3a 100644 --- a/drivers/phy/phy-stm32-usbphyc.c +++ b/drivers/phy/phy-stm32-usbphyc.c @@ -3,6 +3,8 @@ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved */
+#define LOG_CATEGORY UCLASS_PHY + #include <common.h> #include <clk.h> #include <div64.h> @@ -97,8 +99,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) u32 usbphyc_pll;
if ((clk_rate < PLL_INFF_MIN_RATE) || (clk_rate > PLL_INFF_MAX_RATE)) { - pr_debug("%s: input clk freq (%dHz) out of range\n", - __func__, clk_rate); + log_debug("input clk freq (%dHz) out of range\n", + clk_rate); return -EINVAL; }
@@ -115,8 +117,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
writel(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL);
- pr_debug("%s: input clk freq=%dHz, ndiv=%d, frac=%d\n", __func__, - clk_rate, pll_params.ndiv, pll_params.frac); + log_debug("input clk freq=%dHz, ndiv=%d, frac=%d\n", + clk_rate, pll_params.ndiv, pll_params.frac);
return 0; } @@ -153,7 +155,7 @@ static int stm32_usbphyc_phy_init(struct phy *phy) true : false; int ret;
- pr_debug("%s phy ID = %lu\n", __func__, phy->id); + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); /* Check if one phy port has already configured the pll */ if (pllen && stm32_usbphyc_is_init(usbphyc)) goto initialized; @@ -199,7 +201,7 @@ static int stm32_usbphyc_phy_exit(struct phy *phy) struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; int ret;
- pr_debug("%s phy ID = %lu\n", __func__, phy->id); + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); usbphyc_phy->init = false;
/* Check if other phy port requires pllen */ @@ -238,7 +240,7 @@ static int stm32_usbphyc_phy_power_on(struct phy *phy) struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; int ret;
- pr_debug("%s phy ID = %lu\n", __func__, phy->id); + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); if (usbphyc_phy->vdd) { ret = regulator_set_enable(usbphyc_phy->vdd, true); if (ret) @@ -256,7 +258,7 @@ static int stm32_usbphyc_phy_power_off(struct phy *phy) struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id; int ret;
- pr_debug("%s phy ID = %lu\n", __func__, phy->id); + dev_dbg(phy->dev, "phy ID = %lu\n", phy->id); usbphyc_phy->powered = false;
if (stm32_usbphyc_is_powered(usbphyc))