RE: [PATCH] cmd: mmc: Add mmc reg read command for reading card registers

Hi Marek,

Subject: [PATCH] cmd: mmc: Add mmc reg read command for reading card registers

This patch breaks ci build.

+u-boot.imx exceeds file size limit: + limit: 0x5fc00 bytes + actual: 0x60c00 bytes + excess: 0x1000 bytes +make[1]: *** [Makefile:1204: u-boot.imx] Error 1 +make[1]: *** Deleting file 'u-boot.imx' +make: *** [Makefile:167: sub-make] Error 2

Regards, Peng.

Add extension to the 'mmc' command to read out the card registers. Currently, only the eMMC OCR/CID/CSD/EXTCSD/RCA/DSR register are supported. A register value can either be displayed or read into an environment variable.

Signed-off-by: Marek Vasut marex@denx.de

cmd/Kconfig | 8 +++++ cmd/mmc.c | 94 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 102 insertions(+)

diff --git a/cmd/Kconfig b/cmd/Kconfig index 192b3b262f..a0cf03c911 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1104,6 +1104,14 @@ config CMD_BKOPS_ENABLE on a eMMC device. The feature is optionally available on eMMC devices conforming to standard >= 4.41.

+config CMD_MMC_REG

• bool "Enable support for reading card registers in the mmc command"
• depends on CMD_MMC
• default y
• help

•  Enable the commands for reading card registers. This is useful
  

•  mostly for debugging or extracting details from the card.
  

config CMD_MMC_RPMB bool "Enable support for RPMB in the mmc command" depends on SUPPORT_EMMC_RPMB diff --git a/cmd/mmc.c b/cmd/mmc.c index 1529a3e05d..55fbfe822e 100644 --- a/cmd/mmc.c +++ b/cmd/mmc.c @@ -912,6 +912,93 @@ static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag, } #endif

+#if CONFIG_IS_ENABLED(CMD_MMC_REG) +static int do_mmc_reg(struct cmd_tbl *cmdtp, int flag,

• 	 int argc, char *const argv[])
  

+{

• ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
• struct mmc *mmc;
• int i, ret;
• u32 off;
• if (argc < 3 || argc > 5)

• return CMD_RET_USAGE;
  

• mmc = find_mmc_device(curr_device);
• if (!mmc) {

• printf("no mmc device at slot %x\n", curr_device);
  

• return CMD_RET_FAILURE;
  

• }
• if (IS_SD(mmc)) {

• printf("SD registers are not supported\n");
  

• return CMD_RET_FAILURE;
  

• } else {

• off = simple_strtoul(argv[3], NULL, 10);
  

• if (!strcmp(argv[2], "cid")) {
  

• 	if (off > 1)
  

• 		return CMD_RET_USAGE;
  

• 	printf("CID[%i]: 0x%08x\n", off, mmc->cid[off]);
  

• 	if (argv[4])
  

• 		env_set_hex(argv[4], mmc->cid[off]);
  

• 	return CMD_RET_SUCCESS;
  

• }
  

• if (!strcmp(argv[2], "csd")) {
  

• 	if (off > 3)
  

• 		return CMD_RET_USAGE;
  

• 	printf("CSD[%i]: 0x%08x\n", off, mmc->csd[off]);
  

• 	if (argv[4])
  

• 		env_set_hex(argv[4], mmc->csd[off]);
  

• 	return CMD_RET_SUCCESS;
  

• }
  

• if (!strcmp(argv[2], "dsr")) {
  

• 	printf("DSR: 0x%08x\n", mmc->dsr);
  

• 	if (argv[4])
  

• 		env_set_hex(argv[4], mmc->dsr);
  

• 	return CMD_RET_SUCCESS;
  

• }
  

• if (!strcmp(argv[2], "ocr")) {
  

• 	printf("OCR: 0x%08x\n", mmc->ocr);
  

• 	if (argv[4])
  

• 		env_set_hex(argv[4], mmc->ocr);
  

• 	return CMD_RET_SUCCESS;
  

• }
  

• if (!strcmp(argv[2], "rca")) {
  

• 	printf("RCA: 0x%08x\n", mmc->rca);
  

• 	if (argv[4])
  

• 		env_set_hex(argv[4], mmc->rca);
  

• 	return CMD_RET_SUCCESS;
  

• }
  

• if (!strcmp(argv[2], "extcsd") &&
  

•     mmc->version >= MMC_VERSION_4_41) {
  

• 	ret = mmc_send_ext_csd(mmc, ext_csd);
  

• 	if (ret)
  

• 		return ret;
  

• 	if (!strcmp(argv[3], "all")) {
  

• 		/* Dump the entire register */
  

• 		printf("EXT_CSD:");
  

• 		for (i = 0; i < MMC_MAX_BLOCK_LEN; i++) {
  

• 			if (!(i % 10))
  

• 				printf("\n%03i: ", i);
  

• 			printf(" %02x", ext_csd[i]);
  

• 		}
  

• 		printf("\n");
  

• 		return CMD_RET_SUCCESS;
  

• 	}
  

• 	off = simple_strtoul(argv[3], NULL, 10);
  

• 	if (off > 512)
  

• 		return CMD_RET_USAGE;
  

• 	printf("EXT_CSD[%i]: 0x%02x\n", off, ext_csd[off]);
  

• 	if (argv[4])
  

• 		env_set_hex(argv[4], ext_csd[off]);
  

• 	return CMD_RET_SUCCESS;
  

• }
  

• }
• return CMD_RET_FAILURE;

+} +#endif

static int do_mmc_boot_wp(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) { @@ -963,6 +1050,9 @@ static struct cmd_tbl cmd_mmc[] = { #ifdef CONFIG_CMD_BKOPS_ENABLE U_BOOT_CMD_MKENT(bkops-enable, 2, 0, do_mmc_bkops_enable, "", ""), #endif +#if CONFIG_IS_ENABLED(CMD_MMC_REG)

• U_BOOT_CMD_MKENT(reg, 5, 0, do_mmc_reg, "", ""), #endif

};

static int do_mmcops(struct cmd_tbl *cmdtp, int flag, int argc, @@ -1037,6 +1127,10 @@ U_BOOT_CMD( #ifdef CONFIG_CMD_BKOPS_ENABLE "mmc bkops-enable <dev> - enable background operations handshake on device\n" " WARNING: This is a write-once setting.\n" +#endif +#if CONFIG_IS_ENABLED(CMD_MMC_REG)

• "mmc reg read <reg> <offset> [env] - read card register <reg> offset

<offset>\n"

• " (optionally into [env] variable)\n"

#endif );

-- 2.27.0