Re: [PATCH v4 1/7] usb: dwc3: Add dwc3 glue driver for am62

Hi Sjoerd!

Thank you for your efforts on the topic!

On Fri, 2024-01-12 at 09:52 +0100, Sjoerd Simons wrote:

Add glue code for TI AM62 to the dwc3 driver; Most code adopted from TI vendor u-boot code.

Signed-off-by: Sjoerd Simons sjoerd@collabora.com Reviewed-by: Mattijs Korpershoek mkorpershoek@baylibre.com

Works for me on AM6232:

Tested-by: Alexander Sverdlin alexander.sverdlin@siemens.com

---

Changes in v4:

• Add config dependency on SYSCON
• Move defines and constants outside out of function scope

Changes in v2:

• Switch dwc3 glue to a seperate driver rather then in dwc-generic

drivers/usb/dwc3/Kconfig     |  14 ++++  drivers/usb/dwc3/Makefile    |   1 +  drivers/usb/dwc3/dwc3-am62.c | 125 +++++++++++++++++++++++++++++++++++  3 files changed, 140 insertions(+)  create mode 100644 drivers/usb/dwc3/dwc3-am62.c