On Tue, 28 Jan 2025 21:37:37 +0800 1425075683@qq.com wrote:
Hi,
From: Liya Huang 1425075683@qq.com
When I use mach STM32, menuconfig sees this option; It bothers me. I observed that the root cause was that the option was not included in the endif, but when I tried to fix it, an error occurred.
Can you say what the error is, exactly? Because you are right, it should be before the endif. I moved that, and compiled it for all Allwinner boards, which worked. So what is the problem there, exactly?
Cheers, Andre
I didn't find a solution. Only deponds can be used for hiding.
Signed-off-by: Liya Huang 1425075683@qq.com
arch/arm/mach-sunxi/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index ba1b1541437..48dd1e68363 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1137,6 +1137,7 @@ endif
config CHIP_DIP_SCAN bool "Enable DIPs detection for CHIP board"
- depends on ARCH_SUNXI select SUPPORT_EXTENSION_SCAN select W1 select W1_GPIO