Hi Tom,
On Thu, Sep 03, 2015 at 02:21:39PM +0200, Lukasz Majewski wrote:
It is very common that FAT code is using following pattern: if (disk_{read|write}() < 0) return -1;
Up till now the above code was dead, since disk_{read|write) could only return value >= 0. As a result some errors from medium layer (i.e. eMMC/SD) were not caught.
The above behavior was caused by block_{read|write|erase} declared at struct block_dev_desc (@part.h). It returns unsigned long, where 0 indicates error and > 0 indicates that medium operation was correct.
This patch as error regards 0 returned from block_{read|write|erase} when nr_blocks is grater than zero. Read/Write operation with nr_blocks=0 should return 0 and hence is not considered as an error.
Signed-off-by: Lukasz Majewski l.majewski@samsung.com
Test HW: Odroid XU3 - Exynos 5433
Can you pick up Stephen's FAT replacement series and see if it also fixes this problem? Thanks!
Ok, I will test this fat implementation.
However, since for v2015.10 it won't be included, I would also opt for adding this fix to the current u-boot.