On Tue, 2009-08-04 at 14:27 +0200, Wolfgang Denk wrote:
Dear oakad@yahoo.com,
In message 1249383697-28141-2-git-send-email-oakad@yahoo.com you wrote:
From: Alex Dubov oakad@yahoo.com
STx AMC8548 board is an old, AMC form factor, MPC8548 based board intended for RapidIO applications. It features 16MiB NAND flash, one DDR2 soDIMM slot, ethernet on front panel and backplane, RapidIO on backplane, USB controller on local bus (not currently enabled) and no PCI of any kind.
Signed-off-by: Alex Dubov oakad@yahoo.com
Makefile | 3 + board/stx/stxamc8548/Makefile | 51 ++++++ board/stx/stxamc8548/config.mk | 32 ++++ board/stx/stxamc8548/stxamc8548.c | 168 +++++++++++++++++++ board/stx/stxamc8548/u-boot.lds | 143 ++++++++++++++++ include/configs/stxamc8548.h | 332 +++++++++++++++++++++++++++++++++++++ 6 files changed, 729 insertions(+), 0 deletions(-) create mode 100644 board/stx/stxamc8548/Makefile create mode 100644 board/stx/stxamc8548/config.mk create mode 100644 board/stx/stxamc8548/stxamc8548.c create mode 100644 board/stx/stxamc8548/u-boot.lds create mode 100644 include/configs/stxamc8548.h
What's the difference between this patch and the previously submitted one:
Subject: [U-Boot] [PATCH 2/2] stx: add support for AMC8548 board From: Alex Dubov oakad@yahoo.com Date: Tue, 4 Aug 2009 02:26:49 -0700 (PDT)
?
It looks like the MAINTAINERS and MAKEALL entries are still missing for this board too FWIW. Hopefully the other feedback has been taken into consideration in this patch?
It'd be nice when you resubmitted patches to include "v2" in the title, eg "[PATCH v2]" and also listed what you've changed in the comments below your signed-off-by. It makes it easier for others to keep track of what the most recent patch is and what has changed between resubmissions.
Best, Peter