The 'switch to zImage' patch fails to apply using git am, either in the complete (9-patch) bundle, or as part of the 5-patch Igor Opaniuk bundle, or even as a stand-alone patch. This is using the current TOT u-boot-tegra/master.
Please ensure the entire bundle of Apalis-TK1 patches can be applied to u-boot-tegra/master.
Thanks,
Tom
-- nvpublic
-----Original Message----- From: Igor Opaniuk igor.opaniuk@gmail.com Sent: Wednesday, July 31, 2019 5:05 AM To: u-boot@lists.denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com; Philippe Schenker philippe.schenker@toradex.com; Oleksandr Suvorov oleksandr.suvorov@toradex.com; Dominik Sliwa dominik.sliwa@toradex.com; Igor Opaniuk igor.opaniuk@gmail.com; Albert Aribaud albert.u.boot@aribaud.net; Igor Opaniuk igor.opaniuk@toradex.com; Tom Warren TWarren@nvidia.com Subject: [PATCH v1 0/9] apalis-tk1: fixes/updates for v2019.10
Misc. fixes related to pinmux configuration (fan), default bootargs, reset reason output and power rail configuration.
Dominik Sliwa (2): apalis-tk1/t30: colibri_t30: display reset reason apalis-tk1: remove non-esential power rails on boot
Igor Opaniuk (5): apalis-tk1: set apalis gpio 8 aka fan_en apalis-tk1: provide proper USB vendor id apalis-tk1: enable user debug by default apalis-tk1: add pcie_aspm=off to defargs apalis-tk1: switch to zImage
Marcel Ziswiler (2): apalis-tk1: do not explicitly release reset_moci# apalis-tk1: remove default vesa vga mode from vidargs
arch/arm/mach-tegra/sys_info.c | 32 ++++++++----- arch/arm/mach-tegra/tegra124/cpu.c | 45 +++++++++++++++++++ board/toradex/apalis-tk1/apalis-tk1.c | 10 +++++ board/toradex/apalis-tk1/as3722_init.c | 23 ++++++++++ .../apalis-tk1/pinmux-config-apalis-tk1.h | 2 +- configs/apalis-tk1_defconfig | 2 +- include/configs/apalis-tk1.h | 17 +++---- 7 files changed, 111 insertions(+), 20 deletions(-)
-- 2.17.1