From: Dave Gerlach d-gerlach@ti.com
Schematic indicates GPIO5_7 is to be used for VTT regulator control rather than GPIO0_21 so modify enable_vtt_regulator to reflect this. Without this some boards will experience DDR3 corruption and fail to boot.
Signed-off-by: Dave Gerlach d-gerlach@ti.com [trini: Rework patch against mainline] Signed-off-by: Tom Rini trini@ti.com --- arch/arm/cpu/armv7/am33xx/board.c | 6 +++++- arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 2 ++ arch/arm/include/asm/arch-am33xx/cpu.h | 6 +++++- arch/arm/include/asm/arch-am33xx/gpio.h | 4 ++-- board/ti/am43xx/board.c | 16 ++++++++-------- board/ti/am43xx/mux.c | 6 +++--- 6 files changed, 25 insertions(+), 15 deletions(-)
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index c7dad66..2b15a64 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -36,11 +36,15 @@
DECLARE_GLOBAL_DATA_PTR;
-static const struct gpio_bank gpio_bank_am33xx[4] = { +static const struct gpio_bank gpio_bank_am33xx[] = { { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, { (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, { (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, +#ifdef CONFIG_AM43XX + { (void *)AM33XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO5_BASE, METHOD_GPIO_24XX }, +#endif };
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c index 97c00b4..440cf8b 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c @@ -94,6 +94,8 @@ void enable_basic_clocks(void) &cmper->gpio1clkctrl, &cmper->gpio2clkctrl, &cmper->gpio3clkctrl, + &cmper->gpio4clkctrl, + &cmper->gpio5clkctrl, &cmper->i2c1clkctrl, &cmper->emiffwclkctrl, &cmper->emifclkctrl, diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 9febfa2..f0880d7 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -351,7 +351,11 @@ struct cm_perpll { unsigned int gpio2clkctrl; /* offset 0x480 */ unsigned int resv20; unsigned int gpio3clkctrl; /* offset 0x488 */ - unsigned int resv21[7]; + unsigned int resv41; + unsigned int gpio4clkctrl; /* offset 0x490 */ + unsigned int resv42; + unsigned int gpio5clkctrl; /* offset 0x498 */ + unsigned int resv21[3];
unsigned int i2c1clkctrl; /* offset 0x4A8 */ unsigned int resv22; diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h index a1ffd49..220603d 100644 --- a/arch/arm/include/asm/arch-am33xx/gpio.h +++ b/arch/arm/include/asm/arch-am33xx/gpio.h @@ -12,8 +12,8 @@ #define AM33XX_GPIO1_BASE 0x4804C000 #define AM33XX_GPIO2_BASE 0x481AC000 #define AM33XX_GPIO3_BASE 0x481AE000 - -#define GPIO_22 22 +#define AM33XX_GPIO4_BASE 0x48320000 +#define AM33XX_GPIO5_BASE 0x48322000
/* GPIO CTRL register */ #define GPIO_CTRL_DISABLEMODULE_SHIFT 0 diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index ed87cd9..63364b1 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -346,14 +346,14 @@ static void enable_vtt_regulator(void) u32 temp;
/* enable module */ - writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO0_BASE + OMAP_GPIO_CTRL); - - /* enable output for GPIO0_22 */ - writel(GPIO_SETDATAOUT(GPIO_22), - AM33XX_GPIO0_BASE + OMAP_GPIO_SETDATAOUT); - temp = readl(AM33XX_GPIO0_BASE + OMAP_GPIO_OE); - temp = temp & ~(GPIO_OE_ENABLE(GPIO_22)); - writel(temp, AM33XX_GPIO0_BASE + OMAP_GPIO_OE); + writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO5_BASE + OMAP_GPIO_CTRL); + + /* enable output for GPIO5_7 */ + writel(GPIO_SETDATAOUT(7), + AM33XX_GPIO5_BASE + OMAP_GPIO_SETDATAOUT); + temp = readl(AM33XX_GPIO5_BASE + OMAP_GPIO_OE); + temp = temp & ~(GPIO_OE_ENABLE(7)); + writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE); }
void sdram_init(void) diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c index 810b194..51f7fd6 100644 --- a/board/ti/am43xx/mux.c +++ b/board/ti/am43xx/mux.c @@ -33,8 +33,8 @@ static struct module_pin_mux i2c0_pin_mux[] = { {-1}, };
-static struct module_pin_mux gpio0_22_pin_mux[] = { - {OFFSET(ddr_ba2), (MODE(9) | PULLUP_EN)}, /* GPIO0_22 */ +static struct module_pin_mux gpio5_7_pin_mux[] = { + {OFFSET(spi0_cs0), (MODE(7) | PULLUP_EN)}, /* GPIO5_7 */ {-1}, };
@@ -49,7 +49,7 @@ void enable_board_pin_mux(void) configure_module_pin_mux(i2c0_pin_mux);
if (board_is_gpevm()) - configure_module_pin_mux(gpio0_22_pin_mux); + configure_module_pin_mux(gpio5_7_pin_mux); }
void enable_i2c0_pin_mux(void)