Add AM43xx support in the required places
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/omap-common/boot-common.c | 3 ++- drivers/serial/ns16550.c | 5 +++-- 3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 2ba88d0..8f27507 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -16,7 +16,7 @@ COBJS += cache_v7.o COBJS += cpu.o COBJS += syslib.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),) +ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),) SOBJS += lowlevel_init.o endif
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 6b9ce36..6b4772b 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -40,7 +40,8 @@ void save_omap_boot_params(void)
if ((boot_device >= MMC_BOOT_DEVICES_START) && (boot_device <= MMC_BOOT_DEVICES_END)) { -#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) +#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \ + !defined(CONFIG_AM43XX) if ((omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { gd->arch.omap_boot_params.omap_bootmode = diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index d77c25f..bc976ba 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -57,7 +57,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ - defined(CONFIG_AM33XX) || defined(CONFIG_TI814X) + defined(CONFIG_AM33XX) || defined(CONFIG_TI814X) || \ + defined(CONFIG_AM43XX) serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ #endif serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); @@ -72,7 +73,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out(UART_LCRVAL, &com_port->lcr); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \ - defined(CONFIG_TI814X) + defined(CONFIG_TI814X) || defined(CONFIG_AM43XX)
/* /16 is proper to hit 115200 with 48MHz */ serial_out(0, &com_port->mdr1);